diff options
Diffstat (limited to 'source/hal/source/platform/mps3/include/sse-310/peripheral_memmap.h')
| -rw-r--r-- | source/hal/source/platform/mps3/include/sse-310/peripheral_memmap.h | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/source/hal/source/platform/mps3/include/sse-310/peripheral_memmap.h b/source/hal/source/platform/mps3/include/sse-310/peripheral_memmap.h new file mode 100644 index 0000000..9ba8533 --- /dev/null +++ b/source/hal/source/platform/mps3/include/sse-310/peripheral_memmap.h @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2022 Arm Limited. All rights reserved. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef PERIPHERAL_MEMMAP_H +#define PERIPHERAL_MEMMAP_H + +#define DESIGN_NAME "Arm Corstone-310 - AN555" + +/******************************************************************************/ +/* Peripheral memory map */ +/******************************************************************************/ + +#define CMSDK_GPIO0_BASE (0x41100000) /* User GPIO 0 Base Address */ +#define CMSDK_GPIO1_BASE (0x41101000) /* User GPIO 1 Base Address */ +#define CMSDK_GPIO2_BASE (0x41102000) /* User GPIO 2 Base Address */ +#define CMSDK_GPIO3_BASE (0x41103000) /* User GPIO 3 Base Address */ + +#define FMC_CMDSK_GPIO_BASE0 (0x41104000) /* FMC_CMDSK_GPIO_BASE 0 Base Address (4KB) */ +#define FMC_CMDSK_GPIO_BASE1 (0x41105000) /* FMC_CMDSK_GPIO_BASE 1 Base Address (4KB)*/ +#define FMC_CMDSK_GPIO_BASE2 (0x41106000) /* FMC_CMDSK_GPIO_BASE 2 Base Address (4KB)*/ +#define FMC_USER_AHB_BASE (0x41107000) /* FMC_USER_AHB_BASE Base Address (4KB)*/ + +#define DMA0_BASE (0x41200000) /* DMA0 (4KB) */ +#define DMA1_BASE (0x41201000) /* DMA1 (4KB) */ +#define DMA2_BASE (0x41202000) /* DMA2 (4KB) */ +#define DMA3_BASE (0x41203000) /* DMA3 (4KB) */ + +#define USER_APB0_BASE (0x41700000) /* User APB0 */ +#define USER_APB1_BASE (0x41701000) /* User APB1 */ +#define USER_APB2_BASE (0x41702000) /* User APB2 */ +#define USER_APB3_BASE (0x41703000) /* User APB3 */ + +#define MPS3_I2C0_BASE (0x49200000) /* Touch Screen I2C Base Address */ +#define MPS3_I2C1_BASE (0x49201000) /* Audio Interface I2C Base Address */ +#define MPS3_SSP2_BASE (0x49202000) /* ADC SPI PL022 Base Address */ +#define MPS3_SSP3_BASE (0x49203000) /* Shield 0 SPI PL022 Base Address */ + +#define MPS3_SSP4_BASE (0x49204000) /* Shield 1 SPI PL022 Base Address */ +#define MPS3_I2C2_BASE (0x49205000) /* Shield 0 SBCon Base Address */ +#define MPS3_I2C3_BASE (0x49206000) /* Shield 1 SBCon Base Address */ + +#define USER_APB_BASE (0x49207000) /* User APB Base Address */ +/* #undef MPS3_I2C4_BASE */ +#define MPS3_I2C5_BASE (0x49208000) /* DDR EPROM I2C SBCon Base Address */ +#define MPS3_SCC_BASE (0x49300000) /* SCC Base Address */ +#define MPS3_AAIC_I2S_BASE (0x49301000) /* Audio Interface I2S Base Address */ +#define MPS3_FPGAIO_BASE (0x49302000) /* FPGA IO Base Address */ +/* #undef PL011_UART0_BASE */ +#define CMSDK_UART0_BASE (0x49303000) /* UART 0 Base Address */ +#define CMSDK_UART1_BASE (0x49304000) /* UART 1 Base Address */ +#define CMSDK_UART2_BASE (0x49305000) /* UART 2 Base Address */ +#define CMSDK_UART3_BASE (0x49306000) /* UART 3 Base Address Shield 0*/ + +#define ETHOS_U_NPU_BASE (0x40004000) /* Ethos-U NPU base address*/ +#define ETHOS_U_NPU_TA0_BASE (0x48103000) /* Ethos-U NPU's timing adapter 0 base address */ +#define ETHOS_U_NPU_TA1_BASE (0x48103200) /* Ethos-U NPU's timing adapter 1 base address */ + +#define CMSDK_UART4_BASE (0x49307000) /* UART 4 Base Address Shield 1*/ +#define CMSDK_UART5_BASE (0x49308000) /* UART 5 Base Address */ +/* #undef HDMI_AUDIO_BASE */ +#define CLCD_CONFIG_BASE (0x4930A000) /* CLCD CONFIG Base Address */ +#define RTC_BASE (0x4930B000) /* RTC Base address */ +#define SMSC9220_BASE (0x41400000) /* Ethernet SMSC9220 Base Address */ +#define USB_BASE (0x41500000) /* USB Base Address */ +/* #undef CMSDK_SDIO_BASE */ +/* #undef MPS3_CLCD_BASE */ +/* #undef MPS3_eMMC_BASE */ +/* #undef USER_BASE */ + +#define QSPI_XIP_BASE (0x41800000) /* QSPI XIP config Base Address */ +#define QSPI_WRITE_BASE (0x41801000) /* QSPI write config Base Address */ + +/******************************************************************************/ +/* Secure Peripheral memory map */ +/******************************************************************************/ + +#define MPC_ISRAM0_BASE_S (0x50083000) /* ISRAM0 Memory Protection Controller Secure base address */ +#define MPC_ISRAM1_BASE_S (0x50084000) /* ISRAM1 Memory Protection Controller Secure base address */ + +#define SEC_CMSDK_GPIO0_BASE (0x51100000) /* User GPIO 0 Base Address */ +#define SEC_CMSDK_GPIO1_BASE (0x51101000) /* User GPIO 0 Base Address */ +#define SEC_CMSDK_GPIO2_BASE (0x51102000) /* User GPIO 0 Base Address */ +#define SEC_CMSDK_GPIO3_BASE (0x51103000) /* User GPIO 0 Base Address */ + +#define SEC_AHB_USER0_BASE (0x51104000) /* AHB USER 0 Base Address (4KB) */ +#define SEC_AHB_USER1_BASE (0x51105000) /* AHB USER 1 Base Address (4KB)*/ +#define SEC_AHB_USER2_BASE (0x51106000) /* AHB USER 2 Base Address (4KB)*/ +#define SEC_AHB_USER3_BASE (0x51107000) /* AHB USER 3 Base Address (4KB)*/ + +#define SEC_DMA0_BASE (0x51200000) /* DMA0 (4KB) */ +#define SEC_DMA1_BASE (0x51201000) /* DMA1 (4KB) */ +#define SEC_DMA2_BASE (0x51202000) /* DMA2 (4KB) */ +#define SEC_DMA3_BASE (0x51203000) /* DMA3 (4KB) */ + +#define SEC_USER_APB0_BASE (0x51700000) /* User APB0 */ +#define SEC_USER_APB1_BASE (0x51701000) /* User APB1 */ +#define SEC_USER_APB2_BASE (0x51702000) /* User APB2 */ +#define SEC_USER_APB3_BASE (0x51703000) /* User APB3 */ + +#define SEC_MPS3_I2C0_BASE (0x59200000) /* Touch Screen I2C Base Address */ +#define SEC_MPS3_I2C1_BASE (0x59201000) /* Audio Interface I2C Base Address */ +#define SEC_MPS3_SSP2_BASE (0x59202000) /* ADC SPI PL022 Base Address */ +#define SEC_MPS3_SSP3_BASE (0x59203000) /* Shield 0 SPI PL022 Base Address */ + +#define SEC_MPS3_SSP4_BASE (0x59204000) /* Shield 1 SPI PL022 Base Address */ +#define SEC_MPS3_I2C2_BASE (0x59205000) /* Shield 0 SBCon Base Address */ +#define SEC_MPS3_I2C3_BASE (0x59206000) /* Shield 1 SBCon Base Address */ + +/* #undef SEC_MPS3_I2C4_BASE */ +#define SEC_MPS3_I2C5_BASE (0x59208000) /* DDR EPROM I2C SBCon Base Address */ +#define SEC_MPS3_SCC_BASE (0x59300000) /* SCC Base Address */ +#define SEC_MPS3_AAIC_I2S_BASE (0x59301000) /* Audio Interface I2S Base Address */ +#define SEC_MPS3_FPGAIO_BASE (0x59302000) /* FPGA IO Base Address */ +#define SEC_CMSDK_UART0_BASE (0x59303000) /* UART 0 Base Address */ +#define SEC_CMSDK_UART1_BASE (0x59304000) /* UART 1 Base Address */ +#define SEC_CMSDK_UART2_BASE (0x59305000) /* UART 2 Base Address */ +#define SEC_CMSDK_UART3_BASE (0x59306000) /* UART 3 Base Address Shield 0*/ + +#define SEC_CMSDK_UART4_BASE (0x59307000) /* UART 4 Base Address Shield 1*/ +#define SEC_CMSDK_UART5_BASE (0x59308000) /* UART 5 Base Address */ +/* #undef SEC_HDMI_AUDIO_BASE */ +#define SEC_CLCD_CONFIG_BASE (0x5930A000) /* CLCD CONFIG Base Address */ +#define SEC_RTC_BASE (0x5930B000) /* RTC Base address */ + + + + +#define SEC_SMSC9220_BASE (0x51400000) /* Ethernet SMSC91C111 Base Address */ +#define SEC_USB_BASE (0x51500000) /* USB Base Address */ + +#define SEC_ETHOS_U_NPU_BASE (0x50004000) /* Ethos-U NPU base address*/ +#define SEC_ETHOS_U_NPU_TA0_BASE (0x58103000) /* Ethos-U NPU's timing adapter 0 base address */ +#define SEC_ETHOS_U_NPU_TA1_BASE (0x58103200) /* Ethos-U NPU's timing adapter 1 base address */ + +/* #undef SEC_USER_BASE */ + +#define SEC_QSPI_XIP_BASE (0x51800000) /* QSPI XIP config Base Address */ +#define SEC_QSPI_WRITE_BASE (0x51801000) /* QSPI write config Base Address */ + +/******************************************************************************/ +/* MPCs */ +/******************************************************************************/ + +#define MPC_ISRAM0_BASE_S (0x50083000) /* Internal SRAM 0 MPC */ +#define MPC_ISRAM1_BASE_S (0x50084000) /* Internal SRAM 1 MPC */ +#define MPC_BRAM_BASE_S (0x57000000) /* SRAM Memory Protection Controller Secure base address */ +#define MPC_QSPI_BASE_S (0x57001000) /* QSPI Memory Protection Controller Secure base address */ +#define MPC_DDR4_BASE_S (0x57002000) /* DDR4 Memory Protection Controller Secure base address */ + +#endif /* PERIPHERAL_MEMMAP_H */ |