diff options
Diffstat (limited to 'source/hal/platform/mps3/cmake')
5 files changed, 0 insertions, 741 deletions
diff --git a/source/hal/platform/mps3/cmake/subsystem-profiles/sse-300.cmake b/source/hal/platform/mps3/cmake/subsystem-profiles/sse-300.cmake deleted file mode 100644 index eec6fde..0000000 --- a/source/hal/platform/mps3/cmake/subsystem-profiles/sse-300.cmake +++ /dev/null @@ -1,319 +0,0 @@ -#---------------------------------------------------------------------------- -# Copyright (c) 2021 Arm Limited. All rights reserved. -# SPDX-License-Identifier: Apache-2.0 -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#---------------------------------------------------------------------------- - -# CMake configuration file for peripheral memory map for MPS3 as per SSE-300 design -################################################################################################### -# Mem sizes # -################################################################################################### -set(ITCM_SIZE "0x00080000" CACHE STRING "ITCM size: 512 kiB") -set(DTCM_BLK_SIZE "0x00020000" CACHE STRING "DTCM size: 128 kiB, 4 banks") -set(BRAM_SIZE "0x00100000" CACHE STRING "BRAM size: 1 MiB") -set(ISRAM0_SIZE "0x00100000" CACHE STRING "ISRAM0 size: 1 MiB") -set(ISRAM1_SIZE "0x00100000" CACHE STRING "ISRAM1 size: 1 MiB") -set(QSPI_SRAM_SIZE "0x00800000" CACHE STRING "QSPI Flash size: 8 MiB") -set(DDR4_BLK_SIZE "0x10000000" CACHE STRING "DDR4 block size: 256 MiB") - -################################################################################################### -# Base addresses for memory regions # -################################################################################################### -set(ITCM_BASE_NS "0x00000000" CACHE STRING "Instruction TCM Non-Secure base address") -set(BRAM_BASE_NS "0x01000000" CACHE STRING "CODE SRAM Non-Secure base address") -set(DTCM0_BASE_NS "0x20000000" CACHE STRING "Data TCM block 0 Non-Secure base address") -set(DTCM1_BASE_NS "0x20020000" CACHE STRING "Data TCM block 1 Non-Secure base address") -set(DTCM2_BASE_NS "0x20040000" CACHE STRING "Data TCM block 2 Non-Secure base address") -set(DTCM3_BASE_NS "0x20060000" CACHE STRING "Data TCM block 3 Non-Secure base address") -set(ISRAM0_BASE_NS "0x21000000" CACHE STRING "Internal SRAM Area Non-Secure base address") -set(ISRAM1_BASE_NS "0x21100000" CACHE STRING "Internal SRAM Area Non-Secure base address") -set(QSPI_SRAM_BASE_NS "0x28000000" CACHE STRING "QSPI SRAM Non-Secure base address") -set(DDR4_BLK0_BASE_NS "0x60000000" CACHE STRING "DDR4 block 0 Non-Secure base address") -set(DDR4_BLK1_BASE_NS "0x80000000" CACHE STRING "DDR4 block 1 Non-Secure base address") -set(DDR4_BLK2_BASE_NS "0xA0000000" CACHE STRING "DDR4 block 2 Non-Secure base address") -set(DDR4_BLK3_BASE_NS "0xC0000000" CACHE STRING "DDR4 block 3 Non-Secure base address") - -set(ITCM_BASE_S "0x10000000" CACHE STRING "Instruction TCM Secure base address") -set(BRAM_BASE_S "0x11000000" CACHE STRING "CODE SRAM Secure base address") -set(DTCM0_BASE_S "0x30000000" CACHE STRING "Data TCM block 0 Secure base address") -set(DTCM1_BASE_S "0x30020000" CACHE STRING "Data TCM block 1 Secure base address") -set(DTCM2_BASE_S "0x30040000" CACHE STRING "Data TCM block 2 Secure base address") -set(DTCM3_BASE_S "0x30060000" CACHE STRING "Data TCM block 3 Secure base address") -set(ISRAM0_BASE_S "0x31000000" CACHE STRING "Internal SRAM Area Secure base address") -set(ISRAM1_BASE_S "0x31100000" CACHE STRING "Internal SRAM Area Secure base address") -set(QSPI_SRAM_BASE_S "0x38000000" CACHE STRING "QSPI SRAM Non-Secure base address") -set(DDR4_BLK0_BASE_S "0x70000000" CACHE STRING "DDR4 block 0 Secure base address") -set(DDR4_BLK1_BASE_S "0x90000000" CACHE STRING "DDR4 block 1 Secure base address") -set(DDR4_BLK2_BASE_S "0xB0000000" CACHE STRING "DDR4 block 2 Secure base address") -set(DDR4_BLK3_BASE_S "0xD0000000" CACHE STRING "DDR4 block 3 Secure base address") - -################################################################################################### -# Application specific config # -################################################################################################### -set(APP_NOTE "AN552") -set(DESIGN_NAME "Arm Corstone-300 - ${APP_NOTE}" CACHE STRING "Design name") - -# The following parameter is based on the linker/scatter script for SSE-300. -# Do not change this parameter in isolation. -# SRAM size reserved for activation buffers -math(EXPR ACTIVATION_BUF_SRAM_SZ "${ISRAM0_SIZE} + ${ISRAM1_SIZE}" OUTPUT_FORMAT HEXADECIMAL) - -################################################################################################### -# Base addresses for dynamic loads (to be used for FVP form only) # -################################################################################################### -# This parameter is also mentioned in the linker/scatter script for SSE-300. Do not change these -# parameters in isolation. -set(DYNAMIC_MODEL_BASE "${DDR4_BLK1_BASE_S}" CACHE STRING - "Region to be used for dynamic load of model into memory") -set(DYNAMIC_MODEL_SIZE "0x02000000" CACHE STRING "Size of the space reserved for the model") -math(EXPR DYNAMIC_IFM_BASE "${DYNAMIC_MODEL_BASE} + ${DYNAMIC_MODEL_SIZE}" OUTPUT_FORMAT HEXADECIMAL) -set(DYNAMIC_IFM_SIZE "0x01000000" CACHE STRING "Size of the space reserved for the IFM") -math(EXPR DYNAMIC_OFM_BASE "${DYNAMIC_IFM_BASE} + ${DYNAMIC_IFM_SIZE}" OUTPUT_FORMAT HEXADECIMAL) -set(DYNAMIC_OFM_SIZE "0x01000000" CACHE STRING "Size of the space reserved for the OFM") - -################################################################################################### -# Base addresses for peripherals - non secure # -################################################################################################### -set(CMSDK_GPIO0_BASE "0x41100000" CACHE STRING "User GPIO 0 Base Address (4KB)") -set(CMSDK_GPIO1_BASE "0x41101000" CACHE STRING "User GPIO 1 Base Address (4KB)") -set(CMSDK_GPIO2_BASE "0x41102000" CACHE STRING "User GPIO 2 Base Address (4KB)") -set(CMSDK_GPIO3_BASE "0x41103000" CACHE STRING "User GPIO 3 Base Address (4KB)") -set(FMC_CMDSK_GPIO_BASE0 "0x41104000" CACHE STRING "FMC CMDSK GPIO 0 Base Address (4KB)") -set(FMC_CMDSK_GPIO_BASE1 "0x41105000" CACHE STRING "FMC CMDSK GPIO 1 Base Address (4KB)") -set(FMC_CMDSK_GPIO_BASE2 "0x41106000" CACHE STRING "FMC CMDSK GPIO 2 Base Address (4KB)") -set(FMC_USER_AHB_BASE "0x41107000" CACHE STRING "FMC USER AHB Base Address (4KB)") -set(DMA0_BASE "0x41200000" CACHE STRING "DMA0 ExternalManager0 (4KB)") -set(DMA1_BASE "0x41201000" CACHE STRING "DMA1 ExternalManager1 (4KB)") -set(DMA2_BASE "0x41202000" CACHE STRING "DMA2 ExternalManager2 (4KB)") -set(DMA3_BASE "0x41203000" CACHE STRING "DMA3 ExternalManager3 (4KB)") - -set(SMSC9220_BASE "0x41400000" CACHE STRING "Ethernet SMSC9220 Base Address (1MB)") -set(USB_BASE "0x41500000" CACHE STRING "USB Base Address (1MB)") - -set(USER_APB0_BASE "0x41700000" CACHE STRING "User APB0") -set(USER_APB1_BASE "0x41701000" CACHE STRING "User APB1") -set(USER_APB2_BASE "0x41702000" CACHE STRING "User APB2") -set(USER_APB3_BASE "0x41703000" CACHE STRING "User APB3") - -set(QSPI_XIP_BASE "0x41800000" CACHE STRING "QSPI XIP config Base Address ") -set(QSPI_WRITE_BASE "0x41801000" CACHE STRING "QSPI write config Base Address ") - -if (ETHOS_U_NPU_ENABLED) - set(ETHOS_U_NPU_BASE "0x48102000" CACHE STRING "Ethos-U NPU base address") - set(ETHOS_U_NPU_TA0_BASE "0x48103000" CACHE STRING "Ethos-U NPU's timing adapter 0 base address") - set(ETHOS_U_NPU_TA1_BASE "0x48103200" CACHE STRING "Ethos-U NPU's timing adapter 1 base address") -endif (ETHOS_U_NPU_ENABLED) - -set(MPS3_I2C0_BASE "0x49200000" CACHE STRING "Touch Screen I2C Base Address ") -set(MPS3_I2C1_BASE "0x49201000" CACHE STRING "Audio Interface I2C Base Address ") -set(MPS3_SSP2_BASE "0x49202000" CACHE STRING "ADC SPI PL022 Base Address") -set(MPS3_SSP3_BASE "0x49203000" CACHE STRING "Shield 0 SPI PL022 Base Address") -set(MPS3_SSP4_BASE "0x49204000" CACHE STRING "Shield 1 SPI PL022 Base Address") -set(MPS3_I2C2_BASE "0x49205000" CACHE STRING "Shield 0 SBCon Base Address ") -set(MPS3_I2C3_BASE "0x49206000" CACHE STRING "Shield 1 SBCon Base Address ") - -set(USER_APB_BASE "0x49207000" CACHE STRING "User APB") -set(MPS3_I2C5_BASE "0x49208000" CACHE STRING "DDR EPROM I2C SBCon Base Address ") - -set(MPS3_SCC_BASE "0x49300000" CACHE STRING "SCC Base Address ") -set(MPS3_AAIC_I2S_BASE "0x49301000" CACHE STRING "Audio Interface I2S Base Address ") -set(MPS3_FPGAIO_BASE "0x49302000" CACHE STRING "FPGA IO Base Address ") - -set(CMSDK_UART0_BASE "0x49303000" CACHE STRING "UART 0 Base Address ") -set(CMSDK_UART1_BASE "0x49304000" CACHE STRING "UART 1 Base Address ") -set(CMSDK_UART2_BASE "0x49305000" CACHE STRING "UART 2 Base Address ") -set(CMSDK_UART3_BASE "0x49306000" CACHE STRING "UART 3 Base Address Shield 0") -set(CMSDK_UART4_BASE "0x49307000" CACHE STRING "UART 4 Base Address Shield 1") -set(CMSDK_UART5_BASE "0x49308000" CACHE STRING "UART 5 Base Address ") - -set(CLCD_CONFIG_BASE "0x4930A000" CACHE STRING "CLCD CONFIG Base Address ") -set(RTC_BASE "0x4930B000" CACHE STRING "RTC Base address ") - -################################################################################################### -# Base addresses for peripherals - secure # -################################################################################################### -set(SEC_CMSDK_GPIO0_BASE "0x51100000" CACHE STRING "User GPIO 0 Base Address (4KB)") -set(SEC_CMSDK_GPIO1_BASE "0x51101000" CACHE STRING "User GPIO 1 Base Address (4KB)") -set(SEC_CMSDK_GPIO2_BASE "0x51102000" CACHE STRING "User GPIO 2 Base Address (4KB)") -set(SEC_CMSDK_GPIO3_BASE "0x51103000" CACHE STRING "User GPIO 3 Base Address (4KB)") - -set(SEC_AHB_USER0_BASE "0x51104000" CACHE STRING "AHB USER 0 Base Address (4KB)") -set(SEC_AHB_USER1_BASE "0x51105000" CACHE STRING "AHB USER 1 Base Address (4KB)") -set(SEC_AHB_USER2_BASE "0x51106000" CACHE STRING "AHB USER 2 Base Address (4KB)") -set(SEC_AHB_USER3_BASE "0x51107000" CACHE STRING "AHB USER 3 Base Address (4KB)") - -set(SEC_DMA0_BASE "0x51200000" CACHE STRING "DMA0 ExternalManager0 (4KB)") -set(SEC_DMA1_BASE "0x51201000" CACHE STRING "DMA1 ExternalManager1 (4KB)") -set(SEC_DMA2_BASE "0x51202000" CACHE STRING "DMA2 ExternalManager2 (4KB)") -set(SEC_DMA3_BASE "0x51203000" CACHE STRING "DMA3 ExternalManager3 (4KB)") - -set(SEC_SMSC9220_BASE "0x51400000" CACHE STRING "Ethernet SMSC9220 Base Address (1MB)") -set(SEC_USB_BASE "0x51500000" CACHE STRING "USB Base Address (1MB)") - -set(SEC_USER_APB0_BASE "0x51700000" CACHE STRING "User APB0 Base Address") -set(SEC_USER_APB1_BASE "0x51701000" CACHE STRING "User APB1 Base Address") -set(SEC_USER_APB2_BASE "0x51702000" CACHE STRING "User APB2 Base Address") -set(SEC_USER_APB3_BASE "0x51703000" CACHE STRING "User APB3 Base Address") - -set(SEC_QSPI_XIP_BASE "0x51800000" CACHE STRING "QSPI XIP config Base Address ") -set(SEC_QSPI_WRITE_BASE "0x51801000" CACHE STRING "QSPI write config Base Address ") - -if (ETHOS_U_NPU_ENABLED) - set(SEC_ETHOS_U_NPU_BASE "0x58102000" CACHE STRING "Ethos-U NPU base address") - set(SEC_ETHOS_U_NPU_TA0_BASE "0x58103000" CACHE STRING "Ethos-U NPU's timing adapter 0 base address") - set(SEC_ETHOS_U_NPU_TA1_BASE "0x58103200" CACHE STRING "Ethos-U NPU's timing adapter 1 base address") -endif (ETHOS_U_NPU_ENABLED) - -set(SEC_MPS3_I2C0_BASE "0x59200000" CACHE STRING "Touch Screen I2C Base Address ") -set(SEC_MPS3_I2C1_BASE "0x59201000" CACHE STRING "Audio Interface I2C Base Address ") -set(SEC_MPS3_SSP2_BASE "0x59202000" CACHE STRING "ADC SPI PL022 Base Address") -set(SEC_MPS3_SSP3_BASE "0x59203000" CACHE STRING "Shield 0 SPI PL022 Base Address") -set(SEC_MPS3_SSP4_BASE "0x59204000" CACHE STRING "Shield 1 SPI PL022 Base Address") -set(SEC_MPS3_I2C2_BASE "0x59205000" CACHE STRING "Shield 0 SBCon Base Address ") -set(SEC_MPS3_I2C3_BASE "0x59206000" CACHE STRING "Shield 1 SBCon Base Address ") -set(SEC_USER_APB_BASE "0x59207000" CACHE STRING "User APB Base Address") -set(SEC_MPS3_I2C5_BASE "0x59208000" CACHE STRING "DDR EPROM I2C SBCon Base Address ") - -set(SEC_MPS3_SCC_BASE "0x59300000" CACHE STRING "SCC Base Address ") -set(SEC_MPS3_AAIC_I2S_BASE "0x59301000" CACHE STRING "Audio Interface I2S Base Address ") -set(SEC_MPS3_FPGAIO_BASE "0x59302000" CACHE STRING "FPGA IO Base Address ") - -set(SEC_CMSDK_UART0_BASE "0x59303000" CACHE STRING "UART 0 Base Address ") -set(SEC_CMSDK_UART1_BASE "0x59304000" CACHE STRING "UART 1 Base Address ") -set(SEC_CMSDK_UART2_BASE "0x59305000" CACHE STRING "UART 2 Base Address ") -set(SEC_CMSDK_UART3_BASE "0x59306000" CACHE STRING "UART 3 Base Address Shield 0") -set(SEC_CMSDK_UART4_BASE "0x59307000" CACHE STRING "UART 4 Base Address Shield 1") -set(SEC_CMSDK_UART5_BASE "0x59308000" CACHE STRING "UART 5 Base Address ") - -set(SEC_CLCD_CONFIG_BASE "0x5930A000" CACHE STRING "CLCD CONFIG Base Address ") -set(SEC_RTC_BASE "0x5930B000" CACHE STRING "RTC Base address ") - -################################################################################################### -# MPCs # -################################################################################################### -set(MPC_ISRAM0_BASE_S "0x50083000" CACHE STRING "ISRAM0 Memory Protection Controller Secure base address") -set(MPC_ISRAM1_BASE_S "0x50084000" CACHE STRING "ISRAM1 Memory Protection Controller Secure base address") -set(MPC_BRAM_BASE_S "0x57000000" CACHE STRING "SRAM Memory Protection Controller Secure base address") -set(MPC_QSPI_BASE_S "0x57001000" CACHE STRING "QSPI Memory Protection Controller Secure base address") -set(MPC_DDR4_BASE_S "0x57002000" CACHE STRING "DDR4 Memory Protection Controller Secure base address") - -################################################################################################### -# IRQ numbers # -################################################################################################### -set(NONSEC_WATCHDOG_RESET_IRQn " 0" CACHE STRING " Non-Secure Watchdog Reset Interrupt") -set(NONSEC_WATCHDOG_IRQn " 1" CACHE STRING " Non-Secure Watchdog Interrupt ") -set(S32K_TIMER_IRQn " 2" CACHE STRING " S32K SLOWCLK Timer Interrupt ") -set(TIMER0_IRQn " 3" CACHE STRING " TIMER 0 Interrupt ") -set(TIMER1_IRQn " 4" CACHE STRING " TIMER 1 Interrupt ") -set(TIMER2_IRQn " 5" CACHE STRING " TIMER 2 Interrupt ") -set(MPC_IRQn " 9" CACHE STRING " MPC Combined (Secure) Interrupt ") -set(PPC_IRQn "10" CACHE STRING " PPC Combined (Secure) Interrupt ") -set(MSC_IRQn "11" CACHE STRING " MSC Combined (Secure) Interrput ") -set(BRIDGE_ERROR_IRQn "12" CACHE STRING " Bridge Error Combined (Secure) Interrupt ") -set(MGMT_PPU_IRQn "14" CACHE STRING " MGMT_PPU" ) -set(SYS_PPU_IRQn "15" CACHE STRING " SYS_PPU" ) -set(CPU0_PPU_IRQn "16" CACHE STRING " CPU0_PPU" ) -set(DEBUG_PPU_IRQn "26" CACHE STRING " DEBUG_PPU" ) -set(TIMER3_AON_IRQn "27" CACHE STRING " TIMER3_AON" ) -set(CPU0CTIIQ0_IRQn "28" CACHE STRING " CPU0CTIIQ0" ) -set(CPU0CTIIQ01_IRQn "29" CACHE STRING " CPU0CTIIQ01" ) - -set(SYS_TSTAMP_COUNTER_IRQn "32" CACHE STRING " System timestamp counter interrupt ") -set(UARTRX0_IRQn "33" CACHE STRING " UART 0 RX Interrupt ") -set(UARTTX0_IRQn "34" CACHE STRING " UART 0 TX Interrupt ") -set(UARTRX1_IRQn "35" CACHE STRING " UART 1 RX Interrupt ") -set(UARTTX1_IRQn "36" CACHE STRING " UART 1 TX Interrupt ") -set(UARTRX2_IRQn "37" CACHE STRING " UART 2 RX Interrupt ") -set(UARTTX2_IRQn "38" CACHE STRING " UART 2 TX Interrupt ") -set(UARTRX3_IRQn "39" CACHE STRING " UART 3 RX Interrupt ") -set(UARTTX3_IRQn "40" CACHE STRING " UART 3 TX Interrupt ") -set(UARTRX4_IRQn "41" CACHE STRING " UART 4 RX Interrupt ") -set(UARTTX4_IRQn "42" CACHE STRING " UART 4 TX Interrupt ") -set(UART0_IRQn "43" CACHE STRING " UART 0 combined Interrupt ") -set(UART1_IRQn "44" CACHE STRING " UART 1 combined Interrupt ") -set(UART2_IRQn "45" CACHE STRING " UART 2 combined Interrupt ") -set(UART3_IRQn "46" CACHE STRING " UART 3 combined Interrupt ") -set(UART4_IRQn "47" CACHE STRING " UART 4 combined Interrupt ") -set(UARTOVF_IRQn "48" CACHE STRING " UART 0,1,2,3,4 Overflow Interrupt ") -set(ETHERNET_IRQn "49" CACHE STRING " Ethernet Interrupt ") -set(I2S_IRQn "50" CACHE STRING " Audio I2S Interrupt ") -set(TSC_IRQn "51" CACHE STRING " Touch Screen Interrupt ") -set(USB_IRQn "52" CACHE STRING " USB Interrupt ") -set(SPI2_IRQn "53" CACHE STRING " ADC (SPI) Interrupt ") -set(SPI3_IRQn "54" CACHE STRING " SPI 3 Interrupt (Shield 0) ") -set(SPI4_IRQn "55" CACHE STRING " SPI 4 Interrupt (Sheild 1) ") - -if (ETHOS_U_NPU_ENABLED) -set(EthosU_IRQn "56" CACHE STRING " Ethos-U55 Interrupt ") -endif () - -set(GPIO0_IRQn "69" CACHE STRING " GPIO 0 Combined Interrupt ") -set(GPIO1_IRQn "70" CACHE STRING " GPIO 1 Combined Interrupt ") -set(GPIO2_IRQn "71" CACHE STRING " GPIO 2 Combined Interrupt ") -set(GPIO3_IRQn "72" CACHE STRING " GPIO 3 Combined Interrupt ") -set(GPIO0_0_IRQn "73" CACHE STRING "") -set(GPIO0_1_IRQn "74" CACHE STRING "") -set(GPIO0_2_IRQn "75" CACHE STRING "") -set(GPIO0_3_IRQn "76" CACHE STRING "") -set(GPIO0_4_IRQn "77" CACHE STRING "") -set(GPIO0_5_IRQn "78" CACHE STRING "") -set(GPIO0_6_IRQn "79" CACHE STRING "") -set(GPIO0_7_IRQn "80" CACHE STRING "") -set(GPIO0_8_IRQn "81" CACHE STRING "") -set(GPIO0_9_IRQn "82" CACHE STRING "") -set(GPIO0_10_IRQn "83" CACHE STRING "") -set(GPIO0_11_IRQn "84" CACHE STRING "") -set(GPIO0_12_IRQn "85" CACHE STRING "") -set(GPIO0_13_IRQn "86" CACHE STRING "") -set(GPIO0_14_IRQn "87" CACHE STRING "") -set(GPIO0_15_IRQn "88" CACHE STRING "") -set(GPIO1_0_IRQn "89" CACHE STRING "") -set(GPIO1_1_IRQn "90" CACHE STRING "") -set(GPIO1_2_IRQn "91" CACHE STRING "") -set(GPIO1_3_IRQn "92" CACHE STRING "") -set(GPIO1_4_IRQn "93" CACHE STRING "") -set(GPIO1_5_IRQn "94" CACHE STRING "") -set(GPIO1_6_IRQn "95" CACHE STRING "") -set(GPIO1_7_IRQn "96" CACHE STRING "") -set(GPIO1_8_IRQn "97" CACHE STRING "") -set(GPIO1_9_IRQn "98" CACHE STRING "") -set(GPIO1_10_IRQn "99" CACHE STRING "") -set(GPIO1_11_IRQn "100" CACHE STRING "") -set(GPIO1_12_IRQn "101" CACHE STRING "") -set(GPIO1_13_IRQn "102" CACHE STRING "") -set(GPIO1_14_IRQn "103" CACHE STRING "") -set(GPIO1_15_IRQn "104" CACHE STRING "") -set(GPIO2_0_IRQn "105" CACHE STRING "") -set(GPIO2_1_IRQn "106" CACHE STRING "") -set(GPIO2_2_IRQn "107" CACHE STRING "") -set(GPIO2_3_IRQn "108" CACHE STRING "") -set(GPIO2_4_IRQn "109" CACHE STRING "") -set(GPIO2_5_IRQn "110" CACHE STRING "") -set(GPIO2_6_IRQn "111" CACHE STRING "") -set(GPIO2_7_IRQn "112" CACHE STRING "") -set(GPIO2_8_IRQn "113" CACHE STRING "") -set(GPIO2_9_IRQn "114" CACHE STRING "") -set(GPIO2_10_IRQn "115" CACHE STRING "") -set(GPIO2_11_IRQn "116" CACHE STRING "") -set(GPIO2_12_IRQn "117" CACHE STRING "") -set(GPIO2_13_IRQn "118" CACHE STRING "") -set(GPIO2_14_IRQn "119" CACHE STRING "") -set(GPIO2_15_IRQn "120" CACHE STRING "") -set(GPIO3_0_IRQn "121" CACHE STRING "") -set(GPIO3_1_IRQn "122" CACHE STRING "") -set(GPIO3_2_IRQn "123" CACHE STRING "") -set(GPIO3_3_IRQn "124" CACHE STRING "") -set(UARTRX5_IRQn "125" CACHE STRING "UART 5 RX Interrupt") -set(UARTTX5_IRQn "126" CACHE STRING "UART 5 TX Interrupt") -set(UART5_IRQn "127" CACHE STRING "UART 5 combined Interrupt") diff --git a/source/hal/platform/mps3/cmake/templates/mem_regions.h.template b/source/hal/platform/mps3/cmake/templates/mem_regions.h.template deleted file mode 100644 index 72978ce..0000000 --- a/source/hal/platform/mps3/cmake/templates/mem_regions.h.template +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (c) 2021 Arm Limited. All rights reserved. - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -// Auto-generated file -// ** DO NOT EDIT ** - -#ifndef MEM_REGION_DEFS_H -#define MEM_REGION_DEFS_H - -#cmakedefine ITCM_SIZE (@ITCM_SIZE@) /* ITCM size */ -#cmakedefine DTCM_BLK_SIZE (@DTCM_BLK_SIZE@) /* DTCM size, 4 banks of this size available */ -#cmakedefine BRAM_SIZE (@BRAM_SIZE@) /* BRAM size */ -#cmakedefine ISRAM0_SIZE (@ISRAM0_SIZE@) /* ISRAM0 size */ -#cmakedefine ISRAM1_SIZE (@ISRAM1_SIZE@) /* ISRAM1 size */ -#cmakedefine QSPI_SRAM_SIZE (@QSPI_SRAM_SIZE@) /* QSPI Flash size */ -#cmakedefine DDR4_BLK_SIZE (@DDR4_BLK_SIZE@) /* DDR4 block size */ - -#cmakedefine ITCM_BASE_NS (@ITCM_BASE_NS@) /* Instruction TCM Non-Secure base address */ -#cmakedefine BRAM_BASE_NS (@BRAM_BASE_NS@) /* CODE SRAM Non-Secure base address */ -#cmakedefine DTCM0_BASE_NS (@DTCM0_BASE_NS@) /* Data TCM block 0 Non-Secure base address */ -#cmakedefine DTCM1_BASE_NS (@DTCM1_BASE_NS@) /* Data TCM block 1 Non-Secure base address */ -#cmakedefine DTCM2_BASE_NS (@DTCM2_BASE_NS@) /* Data TCM block 2 Non-Secure base address */ -#cmakedefine DTCM3_BASE_NS (@DTCM3_BASE_NS@) /* Data TCM block 3 Non-Secure base address */ -#cmakedefine ISRAM0_BASE_NS (@ISRAM0_BASE_NS@) /* Internal SRAM Area Non-Secure base address */ -#cmakedefine ISRAM1_BASE_NS (@ISRAM1_BASE_NS@) /* Internal SRAM Area Non-Secure base address */ -#cmakedefine QSPI_SRAM_BASE_NS (@QSPI_SRAM_BASE_NS@) /* QSPI SRAM Non-Secure base address */ -#cmakedefine DDR4_BLK0_BASE_NS (@DDR4_BLK0_BASE_NS@) /* DDR4 block 0 Non-Secure base address */ -#cmakedefine DDR4_BLK1_BASE_NS (@DDR4_BLK1_BASE_NS@) /* DDR4 block 1 Non-Secure base address */ -#cmakedefine DDR4_BLK2_BASE_NS (@DDR4_BLK2_BASE_NS@) /* DDR4 block 2 Non-Secure base address */ -#cmakedefine DDR4_BLK3_BASE_NS (@DDR4_BLK3_BASE_NS@) /* DDR4 block 3 Non-Secure base address */ - -#cmakedefine ITCM_BASE_S (@ITCM_BASE_S@) /* Instruction TCM Secure base address */ -#cmakedefine BRAM_BASE_S (@BRAM_BASE_S@) /* CODE SRAM Secure base address */ -#cmakedefine DTCM0_BASE_S (@DTCM0_BASE_S@) /* Data TCM block 0 Secure base address */ -#cmakedefine DTCM1_BASE_S (@DTCM1_BASE_S@) /* Data TCM block 1 Secure base address */ -#cmakedefine DTCM2_BASE_S (@DTCM2_BASE_S@) /* Data TCM block 2 Secure base address */ -#cmakedefine DTCM3_BASE_S (@DTCM3_BASE_S@) /* Data TCM block 3 Secure base address */ -#cmakedefine ISRAM0_BASE_S (@ISRAM0_BASE_S@) /* Internal SRAM Area Secure base address */ -#cmakedefine ISRAM1_BASE_S (@ISRAM1_BASE_S@) /* Internal SRAM Area Secure base address */ -#cmakedefine DDR4_BLK0_BASE_S (@DDR4_BLK0_BASE_S@) /* DDR4 block 0 Secure base address */ -#cmakedefine DDR4_BLK1_BASE_S (@DDR4_BLK1_BASE_S@) /* DDR4 block 1 Secure base address */ -#cmakedefine DDR4_BLK2_BASE_S (@DDR4_BLK2_BASE_S@) /* DDR4 block 2 Secure base address */ -#cmakedefine DDR4_BLK3_BASE_S (@DDR4_BLK3_BASE_S@) /* DDR4 block 3 Secure base address */ - -#endif /* MEM_REGION_DEFS_H */ diff --git a/source/hal/platform/mps3/cmake/templates/peripheral_irqs.h.template b/source/hal/platform/mps3/cmake/templates/peripheral_irqs.h.template deleted file mode 100644 index 7696e13..0000000 --- a/source/hal/platform/mps3/cmake/templates/peripheral_irqs.h.template +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright (c) 2021 Arm Limited. All rights reserved. - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -// Auto-generated file -// ** DO NOT EDIT ** - -#ifndef PERIPHERAL_IRQS_H -#define PERIPHERAL_IRQS_H - -/******************************************************************************/ -/* Peripheral interrupt numbers */ -/******************************************************************************/ - -/* ------------------- Cortex-M Processor Exceptions Numbers -------------- */ -/* -14 to -1 should be defined by the system header */ -/* ---------------------- Core Specific Interrupt Numbers ------------------*/ -#cmakedefine NONSEC_WATCHDOG_RESET_IRQn (@NONSEC_WATCHDOG_RESET_IRQn@) /* Non-Secure Watchdog Reset Interrupt */ -#cmakedefine NONSEC_WATCHDOG_IRQn (@NONSEC_WATCHDOG_IRQn@) /* Non-Secure Watchdog Interrupt */ -#cmakedefine S32K_TIMER_IRQn (@S32K_TIMER_IRQn@) /* S32K Timer Interrupt */ -#cmakedefine TIMER0_IRQn (@TIMER0_IRQn@) /* TIMER 0 Interrupt */ -#cmakedefine TIMER1_IRQn (@TIMER1_IRQn@) /* TIMER 1 Interrupt */ -#cmakedefine TIMER2_IRQn (@TIMER2_IRQn@) /* TIMER 2 Interrupt */ -#cmakedefine MPC_IRQn (@MPC_IRQn@) /* MPC Combined (@Secure@) Interrupt */ -#cmakedefine PPC_IRQn (@PPC_IRQn@) /* PPC Combined (@Secure@) Interrupt */ -#cmakedefine MSC_IRQn (@MSC_IRQn@) /* MSC Combined (@Secure@) Interrput */ -#cmakedefine BRIDGE_ERROR_IRQn (@BRIDGE_ERROR_IRQn@) /* Bridge Error Combined (@Secure@) Interrupt */ -#cmakedefine MGMT_PPU_IRQn (@MGMT_PPU_IRQn@) /* MGMT_PPU */ -#cmakedefine SYS_PPU_IRQn (@SYS_PPU_IRQn@) /* SYS_PPU */ -#cmakedefine CPU0_PPU_IRQn (@CPU0_PPU_IRQn@) /* CPU0_PPU */ -#cmakedefine DEBUG_PPU_IRQn (@DEBUG_PPU_IRQn@) /* DEBUG_PPU */ -#cmakedefine TIMER3_AON_IRQn (@TIMER3_AON_IRQn@) /* TIMER3_AON */ -#cmakedefine CPU0CTIIQ0_IRQn (@CPU0CTIIQ0_IRQn@) /* CPU0CTIIQ0 */ -#cmakedefine CPU0CTIIQ01_IRQn (@CPU0CTIIQ01_IRQn@) /* CPU0CTIIQ01 */ - -#cmakedefine SYS_TSTAMP_COUNTER_IRQn (@SYS_TSTAMP_COUNTER_IRQn@) /* System timestamp counter interrupt */ - -/* ---------------------- CMSDK Specific Interrupt Numbers ----------------- */ -#cmakedefine UARTRX0_IRQn (@UARTRX0_IRQn@) /* UART 0 RX Interrupt */ -#cmakedefine UARTTX0_IRQn (@UARTTX0_IRQn@) /* UART 0 TX Interrupt */ -#cmakedefine UARTRX1_IRQn (@UARTRX1_IRQn@) /* UART 1 RX Interrupt */ -#cmakedefine UARTTX1_IRQn (@UARTTX1_IRQn@) /* UART 1 TX Interrupt */ -#cmakedefine UARTRX2_IRQn (@UARTRX2_IRQn@) /* UART 2 RX Interrupt */ -#cmakedefine UARTTX2_IRQn (@UARTTX2_IRQn@) /* UART 2 TX Interrupt */ -#cmakedefine UARTRX3_IRQn (@UARTRX3_IRQn@) /* UART 3 RX Interrupt */ -#cmakedefine UARTTX3_IRQn (@UARTTX3_IRQn@) /* UART 3 TX Interrupt */ -#cmakedefine UARTRX4_IRQn (@UARTRX4_IRQn@) /* UART 4 RX Interrupt */ -#cmakedefine UARTTX4_IRQn (@UARTTX4_IRQn@) /* UART 4 TX Interrupt */ -#cmakedefine UART0_IRQn (@UART0_IRQn@) /* UART 0 combined Interrupt */ -#cmakedefine UART1_IRQn (@UART1_IRQn@) /* UART 1 combined Interrupt */ -#cmakedefine UART2_IRQn (@UART2_IRQn@) /* UART 2 combined Interrupt */ -#cmakedefine UART3_IRQn (@UART3_IRQn@) /* UART 3 combined Interrupt */ -#cmakedefine UART4_IRQn (@UART4_IRQn@) /* UART 4 combined Interrupt */ -#cmakedefine UARTOVF_IRQn (@UARTOVF_IRQn@) /* UART 0,1,2,3 and 4 Overflow Interrupt */ -#cmakedefine ETHERNET_IRQn (@ETHERNET_IRQn@) /* Ethernet Interrupt */ -#cmakedefine I2S_IRQn (@I2S_IRQn@) /* I2S Interrupt */ -#cmakedefine TSC_IRQn (@TSC_IRQn@) /* Touch Screen Interrupt */ -#cmakedefine SPI2_IRQn (@SPI2_IRQn@) /* SPI 2 Interrupt */ -#cmakedefine SPI3_IRQn (@SPI3_IRQn@) /* SPI 3 Interrupt */ -#cmakedefine SPI4_IRQn (@SPI4_IRQn@) /* SPI 4 Interrupt */ - -#cmakedefine EthosU_IRQn (@EthosU_IRQn@) /* Ethos-Uxx Interrupt */ - -#cmakedefine GPIO0_IRQn (@GPIO0_IRQn@) /* GPIO 0 Combined Interrupt */ -#cmakedefine GPIO1_IRQn (@GPIO1_IRQn@) /* GPIO 1 Combined Interrupt */ -#cmakedefine GPIO2_IRQn (@GPIO2_IRQn@) /* GPIO 2 Combined Interrupt */ -#cmakedefine GPIO3_IRQn (@GPIO3_IRQn@) /* GPIO 3 Combined Interrupt */ - -#cmakedefine GPIO0_0_IRQn (@GPIO0_0_IRQn@) /* All P0 I/O pins used as irq source */ -#cmakedefine GPIO0_1_IRQn (@GPIO0_1_IRQn@) /* There are 16 pins in total */ -#cmakedefine GPIO0_2_IRQn (@GPIO0_2_IRQn@) -#cmakedefine GPIO0_3_IRQn (@GPIO0_3_IRQn@) -#cmakedefine GPIO0_4_IRQn (@GPIO0_4_IRQn@) -#cmakedefine GPIO0_5_IRQn (@GPIO0_5_IRQn@) -#cmakedefine GPIO0_6_IRQn (@GPIO0_6_IRQn@) -#cmakedefine GPIO0_7_IRQn (@GPIO0_7_IRQn@) -#cmakedefine GPIO0_8_IRQn (@GPIO0_8_IRQn@) -#cmakedefine GPIO0_9_IRQn (@GPIO0_9_IRQn@) -#cmakedefine GPIO0_10_IRQn (@GPIO0_10_IRQn@) -#cmakedefine GPIO0_11_IRQn (@GPIO0_11_IRQn@) -#cmakedefine GPIO0_12_IRQn (@GPIO0_12_IRQn@) -#cmakedefine GPIO0_13_IRQn (@GPIO0_13_IRQn@) -#cmakedefine GPIO0_14_IRQn (@GPIO0_14_IRQn@) -#cmakedefine GPIO0_15_IRQn (@GPIO0_15_IRQn@) -#cmakedefine GPIO1_0_IRQn (@GPIO1_0_IRQn@) /* All P1 I/O pins used as irq source */ -#cmakedefine GPIO1_1_IRQn (@GPIO1_1_IRQn@) /* There are 16 pins in total */ -#cmakedefine GPIO1_2_IRQn (@GPIO1_2_IRQn@) -#cmakedefine GPIO1_3_IRQn (@GPIO1_3_IRQn@) -#cmakedefine GPIO1_4_IRQn (@GPIO1_4_IRQn@) -#cmakedefine GPIO1_5_IRQn (@GPIO1_5_IRQn@) -#cmakedefine GPIO1_6_IRQn (@GPIO1_6_IRQn@) -#cmakedefine GPIO1_7_IRQn (@GPIO1_7_IRQn@) -#cmakedefine GPIO1_8_IRQn (@GPIO1_8_IRQn@) -#cmakedefine GPIO1_9_IRQn (@GPIO1_9_IRQn@) -#cmakedefine GPIO1_10_IRQn (@GPIO1_10_IRQn@) -#cmakedefine GPIO1_11_IRQn (@GPIO1_11_IRQn@) -#cmakedefine GPIO1_12_IRQn (@GPIO1_12_IRQn@) -#cmakedefine GPIO1_13_IRQn (@GPIO1_13_IRQn@) -#cmakedefine GPIO1_14_IRQn (@GPIO1_14_IRQn@) -#cmakedefine GPIO1_15_IRQn (@GPIO1_15_IRQn@) -#cmakedefine GPIO2_0_IRQn (@GPIO2_0_IRQn@) /* All P2 I/O pins used as irq source */ -#cmakedefine GPIO2_1_IRQn (@GPIO2_1_IRQn@) /* There are 15 pins in total */ -#cmakedefine GPIO2_2_IRQn (@GPIO2_2_IRQn@) -#cmakedefine GPIO2_3_IRQn (@GPIO2_3_IRQn@) -#cmakedefine GPIO2_4_IRQn (@GPIO2_4_IRQn@) -#cmakedefine GPIO2_5_IRQn (@GPIO2_5_IRQn@) -#cmakedefine GPIO2_6_IRQn (@GPIO2_6_IRQn@) -#cmakedefine GPIO2_7_IRQn (@GPIO2_7_IRQn@) -#cmakedefine GPIO2_8_IRQn (@GPIO2_8_IRQn@) -#cmakedefine GPIO2_9_IRQn (@GPIO2_9_IRQn@) -#cmakedefine GPIO2_10_IRQn (@GPIO2_10_IRQn@) -#cmakedefine GPIO2_11_IRQn (@GPIO2_11_IRQn@) -#cmakedefine GPIO2_12_IRQn (@GPIO2_12_IRQn@) -#cmakedefine GPIO2_13_IRQn (@GPIO2_13_IRQn@) -#cmakedefine GPIO2_14_IRQn (@GPIO2_14_IRQn@) -#cmakedefine GPIO2_15_IRQn (@GPIO2_15_IRQn@) -#cmakedefine GPIO3_0_IRQn (@GPIO3_0_IRQn@) /* All P3 I/O pins used as irq source */ -#cmakedefine GPIO3_1_IRQn (@GPIO3_1_IRQn@) /* There are 4 pins in total */ -#cmakedefine GPIO3_2_IRQn (@GPIO3_2_IRQn@) -#cmakedefine GPIO3_3_IRQn (@GPIO3_3_IRQn@) -#cmakedefine UARTRX5_IRQn (@UARTRX5_IRQn@) /* UART 5 RX Interrupt */ -#cmakedefine UARTTX5_IRQn (@UARTTX5_IRQn@) /* UART 5 TX Interrupt */ -#cmakedefine UART5_IRQn (@UART5_IRQn@) /* UART 5 combined Interrupt */ -#cmakedefine HDCLCD_IRQn (@HDCLCD_IRQn@) /* HDCLCD Interrupt */ - -#endif /* PERIPHERAL_IRQS_H */ diff --git a/source/hal/platform/mps3/cmake/templates/peripheral_memmap.h.template b/source/hal/platform/mps3/cmake/templates/peripheral_memmap.h.template deleted file mode 100644 index d7f0b3a..0000000 --- a/source/hal/platform/mps3/cmake/templates/peripheral_memmap.h.template +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (c) 2021 Arm Limited. All rights reserved. - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -// Auto-generated file -// ** DO NOT EDIT ** - -#ifndef PERIPHERAL_MEMMAP_H -#define PERIPHERAL_MEMMAP_H - -#cmakedefine DESIGN_NAME "@DESIGN_NAME@" - -/******************************************************************************/ -/* Peripheral memory map */ -/******************************************************************************/ - -#cmakedefine CMSDK_GPIO0_BASE (@CMSDK_GPIO0_BASE@) /* User GPIO 0 Base Address */ -#cmakedefine CMSDK_GPIO1_BASE (@CMSDK_GPIO1_BASE@) /* User GPIO 1 Base Address */ -#cmakedefine CMSDK_GPIO2_BASE (@CMSDK_GPIO2_BASE@) /* User GPIO 2 Base Address */ -#cmakedefine CMSDK_GPIO3_BASE (@CMSDK_GPIO3_BASE@) /* User GPIO 3 Base Address */ - -#cmakedefine FMC_CMDSK_GPIO_BASE0 (@FMC_CMDSK_GPIO_BASE0@) /* FMC_CMDSK_GPIO_BASE 0 Base Address (4KB) */ -#cmakedefine FMC_CMDSK_GPIO_BASE1 (@FMC_CMDSK_GPIO_BASE1@) /* FMC_CMDSK_GPIO_BASE 1 Base Address (4KB)*/ -#cmakedefine FMC_CMDSK_GPIO_BASE2 (@FMC_CMDSK_GPIO_BASE2@) /* FMC_CMDSK_GPIO_BASE 2 Base Address (4KB)*/ -#cmakedefine FMC_USER_AHB_BASE (@FMC_USER_AHB_BASE@) /* FMC_USER_AHB_BASE Base Address (4KB)*/ - -#cmakedefine DMA0_BASE (@DMA0_BASE@) /* DMA0 (4KB) */ -#cmakedefine DMA1_BASE (@DMA1_BASE@) /* DMA1 (4KB) */ -#cmakedefine DMA2_BASE (@DMA2_BASE@) /* DMA2 (4KB) */ -#cmakedefine DMA3_BASE (@DMA3_BASE@) /* DMA3 (4KB) */ - -#cmakedefine USER_APB0_BASE (@USER_APB0_BASE@) /* User APB0 */ -#cmakedefine USER_APB1_BASE (@USER_APB1_BASE@) /* User APB1 */ -#cmakedefine USER_APB2_BASE (@USER_APB2_BASE@) /* User APB2 */ -#cmakedefine USER_APB3_BASE (@USER_APB3_BASE@) /* User APB3 */ - -#cmakedefine MPS3_I2C0_BASE (@MPS3_I2C0_BASE@) /* Touch Screen I2C Base Address */ -#cmakedefine MPS3_I2C1_BASE (@MPS3_I2C1_BASE@) /* Audio Interface I2C Base Address */ -#cmakedefine MPS3_SSP2_BASE (@MPS3_SSP2_BASE@) /* ADC SPI PL022 Base Address */ -#cmakedefine MPS3_SSP3_BASE (@MPS3_SSP3_BASE@) /* Shield 0 SPI PL022 Base Address */ - -#cmakedefine MPS3_SSP4_BASE (@MPS3_SSP4_BASE@) /* Shield 1 SPI PL022 Base Address */ -#cmakedefine MPS3_I2C2_BASE (@MPS3_I2C2_BASE@) /* Shield 0 SBCon Base Address */ -#cmakedefine MPS3_I2C3_BASE (@MPS3_I2C3_BASE@) /* Shield 1 SBCon Base Address */ - -#cmakedefine USER_APB_BASE (@USER_APB_BASE@) /* User APB Base Address */ -#cmakedefine MPS3_I2C4_BASE (@MPS3_I2C4_BASE@) /* HDMI I2C SBCon Base Address */ -#cmakedefine MPS3_I2C5_BASE (@MPS3_I2C5_BASE@) /* DDR EPROM I2C SBCon Base Address */ -#cmakedefine MPS3_SCC_BASE (@MPS3_SCC_BASE@) /* SCC Base Address */ -#cmakedefine MPS3_AAIC_I2S_BASE (@MPS3_AAIC_I2S_BASE@) /* Audio Interface I2S Base Address */ -#cmakedefine MPS3_FPGAIO_BASE (@MPS3_FPGAIO_BASE@) /* FPGA IO Base Address */ -#cmakedefine PL011_UART0_BASE (@PL011_UART0_BASE@) /* PL011 UART0 Base Address */ -#cmakedefine CMSDK_UART0_BASE (@CMSDK_UART0_BASE@) /* UART 0 Base Address */ -#cmakedefine CMSDK_UART1_BASE (@CMSDK_UART1_BASE@) /* UART 1 Base Address */ -#cmakedefine CMSDK_UART2_BASE (@CMSDK_UART2_BASE@) /* UART 2 Base Address */ -#cmakedefine CMSDK_UART3_BASE (@CMSDK_UART3_BASE@) /* UART 3 Base Address Shield 0*/ - -#cmakedefine ETHOS_U_NPU_BASE (@ETHOS_U_NPU_BASE@) /* Ethos-U NPU base address*/ -#cmakedefine ETHOS_U_NPU_TA0_BASE (@ETHOS_U_NPU_TA0_BASE@) /* Ethos-U NPU's timing adapter 0 base address */ -#cmakedefine ETHOS_U_NPU_TA1_BASE (@ETHOS_U_NPU_TA1_BASE@) /* Ethos-U NPU's timing adapter 1 base address */ - -#cmakedefine CMSDK_UART4_BASE (@CMSDK_UART4_BASE@) /* UART 4 Base Address Shield 1*/ -#cmakedefine CMSDK_UART5_BASE (@CMSDK_UART5_BASE@) /* UART 5 Base Address */ -#cmakedefine HDMI_AUDIO_BASE (@HDMI_AUDIO_BASE@) /* HDMI AUDIO Base Address */ -#cmakedefine CLCD_CONFIG_BASE (@CLCD_CONFIG_BASE@) /* CLCD CONFIG Base Address */ -#cmakedefine RTC_BASE (@RTC_BASE@) /* RTC Base address */ -#cmakedefine SMSC9220_BASE (@SMSC9220_BASE@) /* Ethernet SMSC9220 Base Address */ -#cmakedefine USB_BASE (@USB_BASE@) /* USB Base Address */ -#cmakedefine CMSDK_SDIO_BASE (@CMSDK_SDIO_BASE@) /* User SDIO Base Address */ -#cmakedefine MPS3_CLCD_BASE (@MPS3_CLCD_BASE@) /* HDLCD Base Address */ -#cmakedefine MPS3_eMMC_BASE (@MPS3_eMMC_BASE@) /* User eMMC Base Address */ -#cmakedefine USER_BASE (@USER_BASE@) /* User ? Base Address */ - -#cmakedefine QSPI_XIP_BASE (@QSPI_XIP_BASE@) /* QSPI XIP config Base Address */ -#cmakedefine QSPI_WRITE_BASE (@QSPI_WRITE_BASE@) /* QSPI write config Base Address */ - -/******************************************************************************/ -/* Secure Peripheral memory map */ -/******************************************************************************/ - -#cmakedefine MPC_ISRAM0_BASE_S (@MPC_ISRAM0_BASE_S@) /* ISRAM0 Memory Protection Controller Secure base address */ -#cmakedefine MPC_ISRAM1_BASE_S (@MPC_ISRAM1_BASE_S@) /* ISRAM1 Memory Protection Controller Secure base address */ - -#cmakedefine SEC_CMSDK_GPIO0_BASE (@SEC_CMSDK_GPIO0_BASE@) /* User GPIO 0 Base Address */ -#cmakedefine SEC_CMSDK_GPIO1_BASE (@SEC_CMSDK_GPIO1_BASE@) /* User GPIO 0 Base Address */ -#cmakedefine SEC_CMSDK_GPIO2_BASE (@SEC_CMSDK_GPIO2_BASE@) /* User GPIO 0 Base Address */ -#cmakedefine SEC_CMSDK_GPIO3_BASE (@SEC_CMSDK_GPIO3_BASE@) /* User GPIO 0 Base Address */ - -#cmakedefine SEC_AHB_USER0_BASE (@SEC_AHB_USER0_BASE@) /* AHB USER 0 Base Address (4KB) */ -#cmakedefine SEC_AHB_USER1_BASE (@SEC_AHB_USER1_BASE@) /* AHB USER 1 Base Address (4KB)*/ -#cmakedefine SEC_AHB_USER2_BASE (@SEC_AHB_USER2_BASE@) /* AHB USER 2 Base Address (4KB)*/ -#cmakedefine SEC_AHB_USER3_BASE (@SEC_AHB_USER3_BASE@) /* AHB USER 3 Base Address (4KB)*/ - -#cmakedefine SEC_DMA0_BASE (@SEC_DMA0_BASE@) /* DMA0 (4KB) */ -#cmakedefine SEC_DMA1_BASE (@SEC_DMA1_BASE@) /* DMA1 (4KB) */ -#cmakedefine SEC_DMA2_BASE (@SEC_DMA2_BASE@) /* DMA2 (4KB) */ -#cmakedefine SEC_DMA3_BASE (@SEC_DMA3_BASE@) /* DMA3 (4KB) */ - -#cmakedefine SEC_USER_APB0_BASE (@SEC_USER_APB0_BASE@) /* User APB0 */ -#cmakedefine SEC_USER_APB1_BASE (@SEC_USER_APB1_BASE@) /* User APB1 */ -#cmakedefine SEC_USER_APB2_BASE (@SEC_USER_APB2_BASE@) /* User APB2 */ -#cmakedefine SEC_USER_APB3_BASE (@SEC_USER_APB3_BASE@) /* User APB3 */ - -#cmakedefine SEC_MPS3_I2C0_BASE (@SEC_MPS3_I2C0_BASE@) /* Touch Screen I2C Base Address */ -#cmakedefine SEC_MPS3_I2C1_BASE (@SEC_MPS3_I2C1_BASE@) /* Audio Interface I2C Base Address */ -#cmakedefine SEC_MPS3_SSP2_BASE (@SEC_MPS3_SSP2_BASE@) /* ADC SPI PL022 Base Address */ -#cmakedefine SEC_MPS3_SSP3_BASE (@SEC_MPS3_SSP3_BASE@) /* Shield 0 SPI PL022 Base Address */ - -#cmakedefine SEC_MPS3_SSP4_BASE (@SEC_MPS3_SSP4_BASE@) /* Shield 1 SPI PL022 Base Address */ -#cmakedefine SEC_MPS3_I2C2_BASE (@SEC_MPS3_I2C2_BASE@) /* Shield 0 SBCon Base Address */ -#cmakedefine SEC_MPS3_I2C3_BASE (@SEC_MPS3_I2C3_BASE@) /* Shield 1 SBCon Base Address */ - -#cmakedefine SEC_MPS3_I2C4_BASE (@SEC_MPS3_I2C4_BASE@) /* HDMI I2C SBCon Base Address */ -#cmakedefine SEC_MPS3_I2C5_BASE (@SEC_MPS3_I2C5_BASE@) /* DDR EPROM I2C SBCon Base Address */ -#cmakedefine SEC_MPS3_SCC_BASE (@SEC_MPS3_SCC_BASE@) /* SCC Base Address */ -#cmakedefine SEC_MPS3_AAIC_I2S_BASE (@SEC_MPS3_AAIC_I2S_BASE@) /* Audio Interface I2S Base Address */ -#cmakedefine SEC_MPS3_FPGAIO_BASE (@SEC_MPS3_FPGAIO_BASE@) /* FPGA IO Base Address */ -#cmakedefine SEC_CMSDK_UART0_BASE (@SEC_CMSDK_UART0_BASE@) /* UART 0 Base Address */ -#cmakedefine SEC_CMSDK_UART1_BASE (@SEC_CMSDK_UART1_BASE@) /* UART 1 Base Address */ -#cmakedefine SEC_CMSDK_UART2_BASE (@SEC_CMSDK_UART2_BASE@) /* UART 2 Base Address */ -#cmakedefine SEC_CMSDK_UART3_BASE (@SEC_CMSDK_UART3_BASE@) /* UART 3 Base Address Shield 0*/ - -#cmakedefine SEC_CMSDK_UART4_BASE (@SEC_CMSDK_UART4_BASE@) /* UART 4 Base Address Shield 1*/ -#cmakedefine SEC_CMSDK_UART5_BASE (@SEC_CMSDK_UART5_BASE@) /* UART 5 Base Address */ -#cmakedefine SEC_HDMI_AUDIO_BASE (@SEC_HDMI_AUDIO_BASE@) /* HDMI AUDIO Base Address */ -#cmakedefine SEC_CLCD_CONFIG_BASE (@SEC_CLCD_CONFIG_BASE@) /* CLCD CONFIG Base Address */ -#cmakedefine SEC_RTC_BASE (@SEC_RTC_BASE@) /* RTC Base address */ -#cmakedefine SEC_SMSC9220_BASE (@SEC_SMSC9220_BASE@) /* Ethernet SMSC9220 Base Address */ -#cmakedefine SEC_USB_BASE (@SEC_USB_BASE@) /* USB Base Address */ - -#cmakedefine SEC_ETHOS_U_NPU_BASE (@SEC_ETHOS_U_NPU_BASE@) /* Ethos-U NPU base address*/ -#cmakedefine SEC_ETHOS_U_NPU_TA0_BASE (@SEC_ETHOS_U_NPU_TA0_BASE@) /* Ethos-U NPU's timing adapter 0 base address */ -#cmakedefine SEC_ETHOS_U_NPU_TA1_BASE (@SEC_ETHOS_U_NPU_TA1_BASE@) /* Ethos-U NPU's timing adapter 1 base address */ - -#cmakedefine SEC_USER_BASE (@SEC_USER_BASE@) /* User ? Base Address */ - -#cmakedefine SEC_QSPI_XIP_BASE (@SEC_QSPI_XIP_BASE@) /* QSPI XIP config Base Address */ -#cmakedefine SEC_QSPI_WRITE_BASE (@SEC_QSPI_WRITE_BASE@) /* QSPI write config Base Address */ - -/******************************************************************************/ -/* MPCs */ -/******************************************************************************/ - -#cmakedefine MPC_ISRAM0_BASE_S (@MPC_ISRAM0_BASE_S@) /* Internal SRAM 0 MPC */ -#cmakedefine MPC_ISRAM1_BASE_S (@MPC_ISRAM1_BASE_S@) /* Internal SRAM 1 MPC */ -#cmakedefine MPC_BRAM_BASE_S (@MPC_BRAM_BASE_S@) /* SRAM Memory Protection Controller Secure base address */ -#cmakedefine MPC_QSPI_BASE_S (@MPC_QSPI_BASE_S@) /* QSPI Memory Protection Controller Secure base address */ -#cmakedefine MPC_DDR4_BASE_S (@MPC_DDR4_BASE_S@) /* DDR4 Memory Protection Controller Secure base address */ - -#endif /* PERIPHERAL_MEMMAP_H */ diff --git a/source/hal/platform/mps3/cmake/templates/timing_adapter_settings.template b/source/hal/platform/mps3/cmake/templates/timing_adapter_settings.template deleted file mode 100644 index d5e202a..0000000 --- a/source/hal/platform/mps3/cmake/templates/timing_adapter_settings.template +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (c) 2021 Arm Limited. All rights reserved. - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -// Auto-generated file -// ** DO NOT EDIT ** - -#ifndef TIMING_ADAPTER_SETTINGS_H -#define TIMING_ADAPTER_SETTINGS_H - -#cmakedefine TA0_BASE (@TA0_BASE@) -#cmakedefine TA1_BASE (@TA1_BASE@) - -/* Timing adapter settings for AXI0 */ -#if defined(TA0_BASE) - -#define TA0_MAXR (@TA0_MAXR@) -#define TA0_MAXW (@TA0_MAXW@) -#define TA0_MAXRW (@TA0_MAXRW@) -#define TA0_RLATENCY (@TA0_RLATENCY@) -#define TA0_WLATENCY (@TA0_WLATENCY@) -#define TA0_PULSE_ON (@TA0_PULSE_ON@) -#define TA0_PULSE_OFF (@TA0_PULSE_OFF@) -#define TA0_BWCAP (@TA0_BWCAP@) -#define TA0_PERFCTRL (@TA0_PERFCTRL@) -#define TA0_PERFCNT (@TA0_PERFCNT@) -#define TA0_MODE (@TA0_MODE@) -#define TA0_HISTBIN (@TA0_HISTBIN@) -#define TA0_HISTCNT (@TA0_HISTCNT@) - -#endif /* defined(TA0_BASE) */ - -/* Timing adapter settings for AXI1 */ -#if defined(TA1_BASE) - -#define TA1_MAXR (@TA1_MAXR@) -#define TA1_MAXW (@TA1_MAXW@) -#define TA1_MAXRW (@TA1_MAXRW@) -#define TA1_RLATENCY (@TA1_RLATENCY@) -#define TA1_WLATENCY (@TA1_WLATENCY@) -#define TA1_PULSE_ON (@TA1_PULSE_ON@) -#define TA1_PULSE_OFF (@TA1_PULSE_OFF@) -#define TA1_BWCAP (@TA1_BWCAP@) -#define TA1_PERFCTRL (@TA1_PERFCTRL@) -#define TA1_PERFCNT (@TA1_PERFCNT@) -#define TA1_MODE (@TA1_MODE@) -#define TA1_HISTBIN (@TA1_HISTBIN@) -#define TA1_HISTCNT (@TA1_HISTCNT@) - -#endif /* defined(TA1_BASE) */ - -#endif /* TIMING_ADAPTER_SETTINGS_H */
\ No newline at end of file |