MLECO-2345: Adding dynamic load support for FVPs

With this patch, the generic inference runner use-case can be
configured to accept the model tflite file at run-time via
the FVP's command line parameters. Same is true for the IFM
and the inference results can be dumped out too.

NOTE: this change is only for supporting the FVP, the FPGA
implementation will not allow additional loading for the
changes in this patch to be useful.

Change-Id: I1318bd5b0cfb7bb635ced6fe58d22c3e401d2547

2 files changed, 31 insertions, 0 deletions

diff --git a/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.ld b/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.ld
index ceaff7d..e5c2a14 100644
--- a/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.ld
+++ b/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.ld
@@ -26,6 +26,13 @@ MEMORY
   BRAM  (rwx) : ORIGIN = 0x11000000, LENGTH = 0x00200000
   SRAM  (rwx) : ORIGIN = 0x31000000, LENGTH = 0x00400000
   DDR   (rwx) : ORIGIN = 0x70000000, LENGTH = 0x02000000
+
+  /* Dynamic load regions declared for use by FVP only
+   * These regions are mentioned in the CMake subsystem profile.
+   * Do not change the addresses here in isolation. */
+  DDR_dynamic_model (rx) : ORIGIN = 0x90000000, LENGTH = 0x02000000
+  DDR_dynamic_ifm   (rx) : ORIGIN = 0x92000000, LENGTH = 0x01000000
+  DDR_dynamic_ofm   (rx) : ORIGIN = 0x93000000, LENGTH = 0x01000000
 }
 
 /* Linker script to place sections and symbol values. Should be used together
diff --git a/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.sct b/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.sct
index dd53a57..4760875 100644
--- a/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.sct
+++ b/source/application/hal/platforms/bare-metal/bsp/mem_layout/mps3-sse-300.sct
@@ -115,4 +115,28 @@ LOAD_REGION_1       0x70000000                  0x02000000
     ;-----------------------------------------------------
     ARM_LIB_HEAP    0x11040000 EMPTY ALIGN 8    0x000F0000
     {}
+
+    ;-----------------------------------------------------
+    ; The following regions are for use by the FVP to
+    ; allow loading or dumping of dynamic data into or
+    ; from the memory. These regions are mentioned in
+    ; the CMake subsystem profile. Do not change the
+    ; addresses and sizes below in isolation.
+    ;-----------------------------------------------------
+    ; 32 MiB of model space for run-time load of model
+    ;-----------------------------------------------------
+    runtime_model   0x90000000 EMPTY ALIGN 16   0x02000000
+    {}
+
+    ;-----------------------------------------------------
+    ; 16 MiB of IFM space for run-time loading (FVP only)
+    ;-----------------------------------------------------
+    runtime_ifm     0x92000000 EMPTY ALIGN 16   0x01000000
+    {}
+
+    ;-----------------------------------------------------
+    ; 16 MiB of OFM space for run-time loading (FVP only)
+    ;-----------------------------------------------------
+    runtime_ofm     0x93000000 EMPTY ALIGN 16   0x01000000
+    {}
 }