| Age | Commit message (Collapse) | Author |
|---|
|
Added int8 and int16 UNIDIRECTIONAL_SEQUENCE_LSTM support.
The implementation does not include support for:
* CIFG
* Peephole
* Projection
* Normalisation
This change also:
* Removed unused Op.BlockLSTM operation type.
* Removed the only one consumer limitation on putting the SplitSliceRead
on the tensor consumer(s), if all consumers fullfills the requirements
* Added Op.VariableTensorWrite as a Operation.memory_function to make
sure writes to variable tensors:
* Always use linear mode
* Are not moved to fast scratch
* Are not fused with other elementwise operation tensor ranges
Change-Id: Ief831738924ac3d1f2ba6d41f10bd6dc969911f3
Signed-off-by: Fredrik Svedberg <fredrik.svedberg@arm.com>
|
|
- Added 64-bit support for ArgMax
- Updated constraints for ArgMax and regenerated SUPPORTED_OPS.md
Change-Id: I4ef7d2e6fccab0088b87757f6afe40a006c77bbd
Signed-off-by: Johan Alfven <johan.alfven@arm.com>
|
|
- Reshape ops can be bypassed and there is no need to process them by the NPU.
There are use cases when the IFM must be preserved so a memcpy is needed.
This is implemented by an AvgPool.
- In order to reduce the cost of the AvgPool the IFM can be copied by DMA.
This is faster and also it can be turned into a real NOP in cases where
the IFM and the OFM can use the same memory space.
- Added new memcpy op. Only NHWC format supported since DMA can not change
the format on the fly.
- Allow ofm to reuse ifm for memcpy op
- Make sure the DMA copy size is 16 byte aligned
Change-Id: I3605a48d47646ff60d2bb3644dd3a23f872235a7
Signed-off-by: Johan Alfven <johan.alfven@arm.com>
|
|
- Update copyright notices to use SPDX format and add OSS mail as contact.
- Update years on files where it had been missed.
Signed-off-by: Rickard Bolin <rickard.bolin@arm.com>
Change-Id: I7e9715ea4e17b76252728c708e46df12ad67ab1f
|
|
- The cascade builder is using the ifm_ifm2_correct_order
function in order to decide if the operator is cascadable or not.
The problem is that this function expects a full shape or no shape
and the cascade builder did not provide that, so the operator was
reported to be non cascadable.
- The fix is to provide a full 4D shape, also refactoring
ifm_ifm2_correct_order to use 4D shape to avoid confusion
in the future.
- Refactoring code so that the scheduler can perform a
correct ifm and ifm2 swap.
Signed-off-by: Johan Alfven <johan.alfven@arm.com>
Change-Id: I9a86c4690612f332afa428456a07e67698852495
|
|
Removed RescaleAdd and RescaleMul operators in favour of
Operation.explicit_scale and removed Operation.rescale.
Signed-off-by: Fredrik Svedberg <fredrik.svedberg@arm.com>
Change-Id: Idccd8851731d4bb8d4e84970e0fd6b409d7d4e45
|
|
Add mypy to pre-commit and clean up all reported errors.
Signed-off-by: Jonas Ohlsson <jonas.ohlsson@arm.com>
Change-Id: If7dc869f5fecdb0e2db40f14e7d9db21aa33df71
|
|
Added support for:
-Rank > 4 and batch > 1
-Tensor dimensions exceeding NPU limit
-Padding in any dimension
(Implementation for functional compliance,
not considering performance)
Signed-off-by: Patrik Gustavsson <patrik.gustavsson@arm.com>
Change-Id: Ief58fb3233d885f10ba5e68c5374b190efbe9351
|
|
Added support for Data layout ops
RESHAPE, SLICE and CONCAT.
-No support for bool_t
-Support limited to Rank <= 4 and N = 1
Signed-off-by: Patrik Gustavsson <patrik.gustavsson@arm.com>
Change-Id: I487ac494b6506a2a6ba947ee758aa193194dd796
|
|
Added support for
-AVGPOOL and CONV2D with TFLite correspondence
-MAXPOOL
-additional support for replacing RESCALE ops with avgpool.
No support for breaking down tensors over the
size supported by NPU.
Signed-off-by: Patrik Gustavsson <patrik.gustavsson@arm.com>
Change-Id: I1d2aa50ac30a26283b3e6f1fe88cba1544b7c189
|
|
Check if non linear tensor format can be used is
refactored.
-Flag avoid_NHCWB16 replaced with needs_linear_format
-Checking restrictions located to one function in graph optimiser.
Signed-off-by: Patrik Gustavsson <patrik.gustavsson@arm.com>
Change-Id: Iec5c7996a1a6039cad052197f1ae56f7c0290440
|
|
- Added full support for PAD operator
- Hardware padding is still used whenever possible
- Bug fix Pad followed by max pool if IFM contains negative values
Change-Id: Ifc64d1943737d94466f5e2821009dab12a49a965
Signed-off-by: Louis Verhaard <louis.verhaard@arm.com>
|
|
All files which have been updated in 2021 and contain a copyright header have had their headers updated.
Signed-off-by: erik.andersson@arm.com <erik.andersson@arm.com>
Change-Id: Ia682111a719d16e690433398ccfb69c7e93c1cd1
|
|
-Removed reshapes in the original graph
-Removed the addition of reshapes to the
optimized graph
-Reshapes with different ifm/ofm quantisation will remain
Signed-off-by: Patrik Gustavsson <patrik.gustavsson@arm.com>
Change-Id: I94862be53dac0d7434815e2aee5ca678228495f8
|
|
Added RescaleAdd operation to avoid non-standard attribute
"rescale" for Add operation. Also changed ResizeBilinear
in the same way.
Signed-off-by: Fredrik Svedberg <fredrik.svedberg@arm.com>
Change-Id: I1d286f63890585c06b8a161df1ff77e3f844a4b9
|
|
Add ifm/ofm shapes to op
Changed to rely on these shapes
Signed-off-by: Patrik Gustavsson <patrik.gustavsson@arm.com>
Change-Id: I571535a1dcadc2bdb04a3c727a8e1c49703b174d
|
|
Use an Enum instead of a bytestring to specify VALID or SAME padding
Signed-off-by: Michael McGeagh <michael.mcgeagh@arm.com>
Change-Id: I4e87f8c32b3bfac176d822a68de061e85a558fce
|
|
Move operator generation code to common functions.
Signed-off-by: Fredrik Svedberg <fredrik.svedberg@arm.com>
Change-Id: I02e185fd793a96ae435fa7d235c9d1e97f388a03
|
