From 116a635581f292cb4882ea1a086f842904f85c3c Mon Sep 17 00:00:00 2001 From: Kristofer Jonsson Date: Thu, 20 Aug 2020 17:25:23 +0200 Subject: Initial commit Change-Id: I14b6becc908a0ac215769c32ee9c43db192ae6c8 --- tools/linters/uncrustify_kernel.cfg | 2150 +++++++++++++++++++++++++++++++++++ tools/mknod/mknod.sh | 36 + 2 files changed, 2186 insertions(+) create mode 100644 tools/linters/uncrustify_kernel.cfg create mode 100755 tools/mknod/mknod.sh (limited to 'tools') diff --git a/tools/linters/uncrustify_kernel.cfg b/tools/linters/uncrustify_kernel.cfg new file mode 100644 index 0000000..fa4979c --- /dev/null +++ b/tools/linters/uncrustify_kernel.cfg @@ -0,0 +1,2150 @@ +# +# Copyright (c) 2020 Arm Limited. All rights reserved. +# +# SPDX-License-Identifier: Apache-2.0 +# +# Licensed under the Apache License, Version 2.0 (the License); you may +# not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an AS IS BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# Uncrustify-0.66.1 + +# +# General options +# + +# The type of line endings. Default=Auto. +newlines = auto # auto/lf/crlf/cr + +# The original size of tabs in the input. Default=8. +input_tab_size = 8 # unsigned number + +# The size of tabs in the output (only used if align_with_tabs=true). Default=8. +output_tab_size = 8 # unsigned number + +# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn). +string_escape_char = 92 # unsigned number + +# Alternate string escape char for Pawn. Only works right before the quote char. +string_escape_char2 = 0 # unsigned number + +# Replace tab characters found in string literals with the escape sequence \t instead. +string_replace_tab_chars = false # false/true + +# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list>=val);'. +# If True, 'assert(x<0 && y>=3)' will be broken. Default=False +# Improvements to template detection may make this option obsolete. +tok_split_gte = false # false/true + +# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file. +disable_processing_cmt = "" # string + +# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file. +enable_processing_cmt = "" # string + +# Enable parsing of digraphs. Default=False. +enable_digraphs = false # false/true + +# Control what to do with the UTF-8 BOM (recommend 'remove'). +utf8_bom = ignore # ignore/add/remove/force + +# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8. +utf8_byte = false # false/true + +# Force the output encoding to UTF-8. +utf8_force = false # false/true + +# +# Spacing options +# + +# Add or remove space around arithmetic operator '+', '-', '/', '*', etc +# also '>>>' '<<' '>>' '%' '|'. +sp_arith = force # ignore/add/remove/force + +# Add or remove space around arithmetic operator '+' and '-'. Overrides sp_arith +sp_arith_additive = ignore # ignore/add/remove/force + +# Add or remove space around assignment operator '=', '+=', etc. +sp_assign = force # ignore/add/remove/force + +# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign. +sp_cpp_lambda_assign = ignore # ignore/add/remove/force + +# Add or remove space after the capture specification in C++11 lambda. +sp_cpp_lambda_paren = ignore # ignore/add/remove/force + +# Add or remove space around assignment operator '=' in a prototype. +sp_assign_default = force # ignore/add/remove/force + +# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign. +sp_before_assign = ignore # ignore/add/remove/force + +# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign. +sp_after_assign = ignore # ignore/add/remove/force + +# Add or remove space in 'NS_ENUM ('. +sp_enum_paren = ignore # ignore/add/remove/force + +# Add or remove space around assignment '=' in enum. +sp_enum_assign = add # ignore/add/remove/force + +# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign. +sp_enum_before_assign = ignore # ignore/add/remove/force + +# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign. +sp_enum_after_assign = force # ignore/add/remove/force + +# Add or remove space around assignment ':' in enum. +sp_enum_colon = ignore # ignore/add/remove/force + +# Add or remove space around preprocessor '##' concatenation operator. Default=Add. +sp_pp_concat = add # ignore/add/remove/force + +# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. +sp_pp_stringify = ignore # ignore/add/remove/force + +# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'. +sp_before_pp_stringify = ignore # ignore/add/remove/force + +# Add or remove space around boolean operators '&&' and '||'. +sp_bool = force # ignore/add/remove/force + +# Add or remove space around compare operator '<', '>', '==', etc. +sp_compare = force # ignore/add/remove/force + +# Add or remove space inside '(' and ')'. +sp_inside_paren = remove # ignore/add/remove/force + +# Add or remove space between nested parens: '((' vs ') )'. +sp_paren_paren = remove # ignore/add/remove/force + +# Add or remove space between back-to-back parens: ')(' vs ') ('. +sp_cparen_oparen = ignore # ignore/add/remove/force + +# Whether to balance spaces inside nested parens. +sp_balance_nested_parens = false # false/true + +# Add or remove space between ')' and '{'. +sp_paren_brace = force # ignore/add/remove/force + +# Add or remove space before pointer star '*'. +sp_before_ptr_star = force # ignore/add/remove/force + +# Add or remove space before pointer star '*' that isn't followed by a variable name +# If set to 'ignore', sp_before_ptr_star is used instead. +sp_before_unnamed_ptr_star = ignore # ignore/add/remove/force + +# Add or remove space between pointer stars '*'. +sp_between_ptr_star = remove # ignore/add/remove/force + +# Add or remove space after pointer star '*', if followed by a word. +sp_after_ptr_star = remove # ignore/add/remove/force + +# Add or remove space after pointer star '*', if followed by a qualifier. +sp_after_ptr_star_qualifier = ignore # ignore/add/remove/force + +# Add or remove space after a pointer star '*', if followed by a func proto/def. +sp_after_ptr_star_func = remove # ignore/add/remove/force + +# Add or remove space after a pointer star '*', if followed by an open paren (function types). +sp_ptr_star_paren = remove # ignore/add/remove/force + +# Add or remove space before a pointer star '*', if followed by a func proto/def. +sp_before_ptr_star_func = ignore # ignore/add/remove/force + +# Add or remove space before a reference sign '&'. +sp_before_byref = add # ignore/add/remove/force + +# Add or remove space before a reference sign '&' that isn't followed by a variable name. +# If set to 'ignore', sp_before_byref is used instead. +sp_before_unnamed_byref = ignore # ignore/add/remove/force + +# Add or remove space after reference sign '&', if followed by a word. +sp_after_byref = ignore # ignore/add/remove/force + +# Add or remove space after a reference sign '&', if followed by a func proto/def. +sp_after_byref_func = ignore # ignore/add/remove/force + +# Add or remove space before a reference sign '&', if followed by a func proto/def. +sp_before_byref_func = ignore # ignore/add/remove/force + +# Add or remove space between type and word. Default=Force. +sp_after_type = force # ignore/add/remove/force + +# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('. +sp_before_template_paren = ignore # ignore/add/remove/force + +# Add or remove space in 'template <' vs 'template<'. +# If set to ignore, sp_before_angle is used. +sp_template_angle = ignore # ignore/add/remove/force + +# Add or remove space before '<>'. +sp_before_angle = ignore # ignore/add/remove/force + +# Add or remove space inside '<' and '>'. +sp_inside_angle = ignore # ignore/add/remove/force + +# Add or remove space between '<>' and ':'. +sp_angle_colon = ignore # ignore/add/remove/force + +# Add or remove space after '<>'. +sp_after_angle = ignore # ignore/add/remove/force + +# Add or remove space between '<>' and '(' as found in 'new List(foo);'. +sp_angle_paren = ignore # ignore/add/remove/force + +# Add or remove space between '<>' and '()' as found in 'new List();'. +sp_angle_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between '<>' and a word as in 'List m;' or 'template static ...'. +sp_angle_word = ignore # ignore/add/remove/force + +# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add. +sp_angle_shift = add # ignore/add/remove/force + +# Permit removal of the space between '>>' in 'foo >' (C++11 only). Default=False. +# sp_angle_shift cannot remove the space without this option. +sp_permit_cpp11_shift = false # false/true + +# Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc. +sp_before_sparen = force # ignore/add/remove/force + +# Add or remove space inside if-condition '(' and ')'. +sp_inside_sparen = remove # ignore/add/remove/force + +# Add or remove space before if-condition ')'. Overrides sp_inside_sparen. +sp_inside_sparen_close = ignore # ignore/add/remove/force + +# Add or remove space after if-condition '('. Overrides sp_inside_sparen. +sp_inside_sparen_open = ignore # ignore/add/remove/force + +# Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc. +sp_after_sparen = force # ignore/add/remove/force + +# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc. +sp_sparen_brace = ignore # ignore/add/remove/force + +# Add or remove space between 'invariant' and '(' in the D language. +sp_invariant_paren = ignore # ignore/add/remove/force + +# Add or remove space after the ')' in 'invariant (C) c' in the D language. +sp_after_invariant_paren = ignore # ignore/add/remove/force + +# Add or remove space before empty statement ';' on 'if', 'for' and 'while'. +sp_special_semi = ignore # ignore/add/remove/force + +# Add or remove space before ';'. Default=Remove. +sp_before_semi = remove # ignore/add/remove/force + +# Add or remove space before ';' in non-empty 'for' statements. +sp_before_semi_for = ignore # ignore/add/remove/force + +# Add or remove space before a semicolon of an empty part of a for statement. +sp_before_semi_for_empty = ignore # ignore/add/remove/force + +# Add or remove space after ';', except when followed by a comment. Default=Add. +sp_after_semi = add # ignore/add/remove/force + +# Add or remove space after ';' in non-empty 'for' statements. Default=Force. +sp_after_semi_for = force # ignore/add/remove/force + +# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; ). +sp_after_semi_for_empty = ignore # ignore/add/remove/force + +# Add or remove space before '[' (except '[]'). +sp_before_square = remove # ignore/add/remove/force + +# Add or remove space before '[]'. +sp_before_squares = remove # ignore/add/remove/force + +# Add or remove space inside a non-empty '[' and ']'. +sp_inside_square = remove # ignore/add/remove/force + +# Add or remove space after ',', 'a,b' vs 'a, b'. +sp_after_comma = force # ignore/add/remove/force + +# Add or remove space before ','. Default=Remove. +sp_before_comma = remove # ignore/add/remove/force + +# Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'. Only for C#. +sp_after_mdatype_commas = ignore # ignore/add/remove/force + +# Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'. Only for C#. +sp_before_mdatype_commas = ignore # ignore/add/remove/force + +# Add or remove space between ',' in multidimensional array type 'int[,,]'. Only for C#. +sp_between_mdatype_commas = ignore # ignore/add/remove/force + +# Add or remove space between an open paren and comma: '(,' vs '( ,'. Default=Force. +sp_paren_comma = force # ignore/add/remove/force + +# Add or remove space before the variadic '...' when preceded by a non-punctuator. +sp_before_ellipsis = ignore # ignore/add/remove/force + +# Add or remove space after class ':'. +sp_after_class_colon = ignore # ignore/add/remove/force + +# Add or remove space before class ':'. +sp_before_class_colon = ignore # ignore/add/remove/force + +# Add or remove space after class constructor ':'. +sp_after_constr_colon = ignore # ignore/add/remove/force + +# Add or remove space before class constructor ':'. +sp_before_constr_colon = ignore # ignore/add/remove/force + +# Add or remove space before case ':'. Default=Remove. +sp_before_case_colon = remove # ignore/add/remove/force + +# Add or remove space between 'operator' and operator sign. +sp_after_operator = ignore # ignore/add/remove/force + +# Add or remove space between the operator symbol and the open paren, as in 'operator ++('. +sp_after_operator_sym = ignore # ignore/add/remove/force + +# Overrides sp_after_operator_sym when the operator has no arguments, as in 'operator *()'. +sp_after_operator_sym_empty = ignore # ignore/add/remove/force + +# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'. +sp_after_cast = remove # ignore/add/remove/force + +# Add or remove spaces inside cast parens. +sp_inside_paren_cast = remove # ignore/add/remove/force + +# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'. +sp_cpp_cast_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'sizeof' and '('. +sp_sizeof_paren = remove # ignore/add/remove/force + +# Add or remove space after the tag keyword (Pawn). +sp_after_tag = ignore # ignore/add/remove/force + +# Add or remove space inside enum '{' and '}'. +sp_inside_braces_enum = force # ignore/add/remove/force + +# Add or remove space inside struct/union '{' and '}'. +sp_inside_braces_struct = force # ignore/add/remove/force + +# Add or remove space after open brace in an unnamed temporary direct-list-initialization. +sp_after_type_brace_init_lst_open = ignore # ignore/add/remove/force + +# Add or remove space before close brace in an unnamed temporary direct-list-initialization. +sp_before_type_brace_init_lst_close = ignore # ignore/add/remove/force + +# Add or remove space inside an unnamed temporary direct-list-initialization. +sp_inside_type_brace_init_lst = ignore # ignore/add/remove/force + +# Add or remove space inside '{' and '}'. +sp_inside_braces = force # ignore/add/remove/force + +# Add or remove space inside '{}'. +sp_inside_braces_empty = remove # ignore/add/remove/force + +# Add or remove space between return type and function name +# A minimum of 1 is forced except for pointer return types. +sp_type_func = force # ignore/add/remove/force + +# Add or remove space between type and open brace of an unnamed temporary direct-list-initialization. +sp_type_brace_init_lst = ignore # ignore/add/remove/force + +# Add or remove space between function name and '(' on function declaration. +sp_func_proto_paren = remove # ignore/add/remove/force + +# Add or remove space between function name and '()' on function declaration without parameters. +sp_func_proto_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between function name and '(' on function definition. +sp_func_def_paren = remove # ignore/add/remove/force + +# Add or remove space between function name and '()' on function definition without parameters. +sp_func_def_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space inside empty function '()'. +sp_inside_fparens = remove # ignore/add/remove/force + +# Add or remove space inside function '(' and ')'. +sp_inside_fparen = remove # ignore/add/remove/force + +# Add or remove space inside the first parens in the function type: 'void (*x)(...)'. +sp_inside_tparen = remove # ignore/add/remove/force + +# Add or remove between the parens in the function type: 'void (*x)(...)'. +sp_after_tparen_close = remove # ignore/add/remove/force + +# Add or remove space between ']' and '(' when part of a function call. +sp_square_fparen = remove # ignore/add/remove/force + +# Add or remove space between ')' and '{' of function. +sp_fparen_brace = force # ignore/add/remove/force + +# Java: Add or remove space between ')' and '{{' of double brace initializer. +sp_fparen_dbrace = ignore # ignore/add/remove/force + +# Add or remove space between function name and '(' on function calls. +sp_func_call_paren = remove # ignore/add/remove/force + +# Add or remove space between function name and '()' on function calls without parameters. +# If set to 'ignore' (the default), sp_func_call_paren is used. +sp_func_call_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between the user function name and '(' on function calls +# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file. +sp_func_call_user_paren = ignore # ignore/add/remove/force + +# Add or remove space between a constructor/destructor and the open paren. +sp_func_class_paren = ignore # ignore/add/remove/force + +# Add or remove space between a constructor without parameters or destructor and '()'. +sp_func_class_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between 'return' and '('. +sp_return_paren = force # ignore/add/remove/force + +# Add or remove space between '__attribute__' and '('. +sp_attribute_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'defined' and '(' in '#if defined (FOO)'. +sp_defined_paren = remove # ignore/add/remove/force + +# Add or remove space between 'throw' and '(' in 'throw (something)'. +sp_throw_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'. +sp_after_throw = ignore # ignore/add/remove/force + +# Add or remove space between 'catch' and '(' in 'catch (something) { }' +# If set to ignore, sp_before_sparen is used. +sp_catch_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'version' and '(' in 'version (something) { }' (D language) +# If set to ignore, sp_before_sparen is used. +sp_version_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language) +# If set to ignore, sp_before_sparen is used. +sp_scope_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'super' and '(' in 'super (something)'. Default=Remove. +sp_super_paren = remove # ignore/add/remove/force + +# Add or remove space between 'this' and '(' in 'this (something)'. Default=Remove. +sp_this_paren = remove # ignore/add/remove/force + +# Add or remove space between macro and value. +sp_macro = ignore # ignore/add/remove/force + +# Add or remove space between macro function ')' and value. +sp_macro_func = add # ignore/add/remove/force + +# Add or remove space between 'else' and '{' if on the same line. +sp_else_brace = force # ignore/add/remove/force + +# Add or remove space between '}' and 'else' if on the same line. +sp_brace_else = force # ignore/add/remove/force + +# Add or remove space between '}' and the name of a typedef on the same line. +sp_brace_typedef = force # ignore/add/remove/force + +# Add or remove space between 'catch' and '{' if on the same line. +sp_catch_brace = force # ignore/add/remove/force + +# Add or remove space between '}' and 'catch' if on the same line. +sp_brace_catch = force # ignore/add/remove/force + +# Add or remove space between 'finally' and '{' if on the same line. +sp_finally_brace = force # ignore/add/remove/force + +# Add or remove space between '}' and 'finally' if on the same line. +sp_brace_finally = force # ignore/add/remove/force + +# Add or remove space between 'try' and '{' if on the same line. +sp_try_brace = force # ignore/add/remove/force + +# Add or remove space between get/set and '{' if on the same line. +sp_getset_brace = ignore # ignore/add/remove/force + +# Add or remove space between a variable and '{' for C++ uniform initialization. Default=Add. +sp_word_brace = add # ignore/add/remove/force + +# Add or remove space between a variable and '{' for a namespace. Default=Add. +sp_word_brace_ns = add # ignore/add/remove/force + +# Add or remove space before the '::' operator. +sp_before_dc = ignore # ignore/add/remove/force + +# Add or remove space after the '::' operator. +sp_after_dc = ignore # ignore/add/remove/force + +# Add or remove around the D named array initializer ':' operator. +sp_d_array_colon = ignore # ignore/add/remove/force + +# Add or remove space after the '!' (not) operator. Default=Remove. +sp_not = remove # ignore/add/remove/force + +# Add or remove space after the '~' (invert) operator. Default=Remove. +sp_inv = remove # ignore/add/remove/force + +# Add or remove space after the '&' (address-of) operator. Default=Remove +# This does not affect the spacing after a '&' that is part of a type. +sp_addr = remove # ignore/add/remove/force + +# Add or remove space around the '.' or '->' operators. Default=Remove. +sp_member = remove # ignore/add/remove/force + +# Add or remove space after the '*' (dereference) operator. Default=Remove +# This does not affect the spacing after a '*' that is part of a type. +sp_deref = remove # ignore/add/remove/force + +# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove. +sp_sign = remove # ignore/add/remove/force + +# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove. +sp_incdec = remove # ignore/add/remove/force + +# Add or remove space before a backslash-newline at the end of a line. Default=Add. +sp_before_nl_cont = add # ignore/add/remove/force + +# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'. +sp_after_oc_scope = ignore # ignore/add/remove/force + +# Add or remove space after the colon in message specs +# '-(int) f:(int) x;' vs '-(int) f: (int) x;'. +sp_after_oc_colon = ignore # ignore/add/remove/force + +# Add or remove space before the colon in message specs +# '-(int) f: (int) x;' vs '-(int) f : (int) x;'. +sp_before_oc_colon = ignore # ignore/add/remove/force + +# Add or remove space after the colon in immutable dictionary expression +# 'NSDictionary *test = @{@"foo" :@"bar"};'. +sp_after_oc_dict_colon = ignore # ignore/add/remove/force + +# Add or remove space before the colon in immutable dictionary expression +# 'NSDictionary *test = @{@"foo" :@"bar"};'. +sp_before_oc_dict_colon = ignore # ignore/add/remove/force + +# Add or remove space after the colon in message specs +# '[object setValue:1];' vs '[object setValue: 1];'. +sp_after_send_oc_colon = remove # ignore/add/remove/force + +# Add or remove space before the colon in message specs +# '[object setValue:1];' vs '[object setValue :1];'. +sp_before_send_oc_colon = remove # ignore/add/remove/force + +# Add or remove space after the (type) in message specs +# '-(int)f: (int) x;' vs '-(int)f: (int)x;'. +sp_after_oc_type = ignore # ignore/add/remove/force + +# Add or remove space after the first (type) in message specs +# '-(int) f:(int)x;' vs '-(int)f:(int)x;'. +sp_after_oc_return_type = ignore # ignore/add/remove/force + +# Add or remove space between '@selector' and '(' +# '@selector(msgName)' vs '@selector (msgName)' +# Also applies to @protocol() constructs. +sp_after_oc_at_sel = ignore # ignore/add/remove/force + +# Add or remove space between '@selector(x)' and the following word +# '@selector(foo) a:' vs '@selector(foo)a:'. +sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force + +# Add or remove space inside '@selector' parens +# '@selector(foo)' vs '@selector( foo )' +# Also applies to @protocol() constructs. +sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force + +# Add or remove space before a block pointer caret +# '^int (int arg){...}' vs. ' ^int (int arg){...}'. +sp_before_oc_block_caret = ignore # ignore/add/remove/force + +# Add or remove space after a block pointer caret +# '^int (int arg){...}' vs. '^ int (int arg){...}'. +sp_after_oc_block_caret = ignore # ignore/add/remove/force + +# Add or remove space between the receiver and selector in a message. +# '[receiver selector ...]'. +sp_after_oc_msg_receiver = ignore # ignore/add/remove/force + +# Add or remove space after @property. +sp_after_oc_property = ignore # ignore/add/remove/force + +# Add or remove space around the ':' in 'b ? t : f'. +sp_cond_colon = force # ignore/add/remove/force + +# Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon. +sp_cond_colon_before = ignore # ignore/add/remove/force + +# Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon. +sp_cond_colon_after = ignore # ignore/add/remove/force + +# Add or remove space around the '?' in 'b ? t : f'. +sp_cond_question = force # ignore/add/remove/force + +# Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question. +sp_cond_question_before = ignore # ignore/add/remove/force + +# Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question. +sp_cond_question_after = ignore # ignore/add/remove/force + +# In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options. +sp_cond_ternary_short = ignore # ignore/add/remove/force + +# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here. +sp_case_label = ignore # ignore/add/remove/force + +# Control the space around the D '..' operator. +sp_range = ignore # ignore/add/remove/force + +# Control the spacing after ':' in 'for (TYPE VAR : EXPR)'. Only JAVA. +sp_after_for_colon = ignore # ignore/add/remove/force + +# Control the spacing before ':' in 'for (TYPE VAR : EXPR)'. Only JAVA. +sp_before_for_colon = ignore # ignore/add/remove/force + +# Control the spacing in 'extern (C)' (D). +sp_extern_paren = ignore # ignore/add/remove/force + +# Control the space after the opening of a C++ comment '// A' vs '//A'. +sp_cmt_cpp_start = ignore # ignore/add/remove/force + +# True: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'. +sp_cmt_cpp_doxygen = false # false/true + +# True: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'. +sp_cmt_cpp_qttr = false # false/true + +# Controls the spaces between #else or #endif and a trailing comment. +sp_endif_cmt = ignore # ignore/add/remove/force + +# Controls the spaces after 'new', 'delete' and 'delete[]'. +sp_after_new = ignore # ignore/add/remove/force + +# Controls the spaces between new and '(' in 'new()'. +sp_between_new_paren = ignore # ignore/add/remove/force + +# Controls the spaces between ')' and 'type' in 'new(foo) BAR'. +sp_after_newop_paren = ignore # ignore/add/remove/force + +# Controls the spaces inside paren of the new operator: 'new(foo) BAR'. +sp_inside_newop_paren = ignore # ignore/add/remove/force + +# Controls the space after open paren of the new operator: 'new(foo) BAR'. +# Overrides sp_inside_newop_paren. +sp_inside_newop_paren_open = ignore # ignore/add/remove/force + +# Controls the space before close paren of the new operator: 'new(foo) BAR'. +# Overrides sp_inside_newop_paren. +sp_inside_newop_paren_close = ignore # ignore/add/remove/force + +# Controls the spaces before a trailing or embedded comment. +sp_before_tr_emb_cmt = ignore # ignore/add/remove/force + +# Number of spaces before a trailing or embedded comment. +sp_num_before_tr_emb_cmt = 0 # unsigned number + +# Control space between a Java annotation and the open paren. +sp_annotation_paren = ignore # ignore/add/remove/force + +# If True, vbrace tokens are dropped to the previous token and skipped. +sp_skip_vbrace_tokens = false # false/true + +# If True, a is inserted after #define. +force_tab_after_define = false # false/true + +# +# Indenting +# + +# The number of columns to indent per level. +# Usually 2, 3, 4, or 8. Default=8. +indent_columns = 8 # unsigned number + +# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents. +# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each '(' level. +indent_continue = 0 # number + +# The continuation indent for func_*_param if they are true. +# If non-zero, this overrides the indent. +indent_param = 0 # unsigned number + +# How to use tabs when indenting code +# 0=spaces only +# 1=indent with tabs to brace level, align with spaces (default) +# 2=indent and align with tabs, using spaces when not on a tabstop +indent_with_tabs = 2 # unsigned number + +# Comments that are not a brace level are indented with tabs on a tabstop. +# Requires indent_with_tabs=2. If false, will use spaces. +indent_cmt_with_tabs = false # false/true + +# Whether to indent strings broken by '\' so that they line up. +indent_align_string = false # false/true + +# The number of spaces to indent multi-line XML strings. +# Requires indent_align_string=True. +indent_xml_string = 0 # unsigned number + +# Spaces to indent '{' from level. +indent_brace = 0 # unsigned number + +# Whether braces are indented to the body level. +indent_braces = false # false/true + +# Disabled indenting function braces if indent_braces is True. +indent_braces_no_func = false # false/true + +# Disabled indenting class braces if indent_braces is True. +indent_braces_no_class = false # false/true + +# Disabled indenting struct braces if indent_braces is True. +indent_braces_no_struct = false # false/true + +# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc. +indent_brace_parent = false # false/true + +# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace. +indent_paren_open_brace = false # false/true + +# indent a C# delegate by another level, default is to not indent by another level. +indent_cs_delegate_brace = false # false/true + +# Whether the 'namespace' body is indented. +indent_namespace = false # false/true + +# Only indent one namespace and no sub-namespaces. +# Requires indent_namespace=True. +indent_namespace_single_indent = false # false/true + +# The number of spaces to indent a namespace block. +indent_namespace_level = 0 # unsigned number + +# If the body of the namespace is longer than this number, it won't be indented. +# Requires indent_namespace=True. Default=0 (no limit) +indent_namespace_limit = 0 # unsigned number + +# Whether the 'extern "C"' body is indented. +indent_extern = false # false/true + +# Whether the 'class' body is indented. +indent_class = false # false/true + +# Whether to indent the stuff after a leading base class colon. +indent_class_colon = false # false/true + +# Indent based on a class colon instead of the stuff after the colon. +# Requires indent_class_colon=True. Default=False. +indent_class_on_colon = false # false/true + +# Whether to indent the stuff after a leading class initializer colon. +indent_constr_colon = false # false/true + +# Virtual indent from the ':' for member initializers. Default=2. +indent_ctor_init_leading = 2 # unsigned number + +# Additional indent for constructor initializer list. +# Negative values decrease indent down to the first column. Default=0. +indent_ctor_init = 0 # number + +# False=treat 'else\nif' as 'else if' for indenting purposes +# True=indent the 'if' one level. +indent_else_if = false # false/true + +# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute. +indent_var_def_blk = 0 # number + +# Indent continued variable declarations instead of aligning. +indent_var_def_cont = false # false/true + +# Indent continued shift expressions ('<<' and '>>') instead of aligning. +# Turn align_left_shift off when enabling this. +indent_shift = false # false/true + +# True: force indentation of function definition to start in column 1 +# False: use the default behavior. +indent_func_def_force_col1 = false # false/true + +# True: indent continued function call parameters one indent level +# False: align parameters under the open paren. +indent_func_call_param = false # false/true + +# Same as indent_func_call_param, but for function defs. +indent_func_def_param = false # false/true + +# Same as indent_func_call_param, but for function protos. +indent_func_proto_param = false # false/true + +# Same as indent_func_call_param, but for class declarations. +indent_func_class_param = false # false/true + +# Same as indent_func_call_param, but for class variable constructors. +indent_func_ctor_var_param = false # false/true + +# Same as indent_func_call_param, but for templates. +indent_template_param = false # false/true + +# Double the indent for indent_func_xxx_param options. +# Use both values of the options indent_columns and indent_param. +indent_func_param_double = false # false/true + +# Indentation column for standalone 'const' function decl/proto qualifier. +indent_func_const = 0 # unsigned number + +# Indentation column for standalone 'throw' function decl/proto qualifier. +indent_func_throw = 0 # unsigned number + +# The number of spaces to indent a continued '->' or '.' +# Usually set to 0, 1, or indent_columns. +indent_member = 0 # unsigned number + +# Spaces to indent single line ('//') comments on lines before code. +indent_sing_line_comments = 0 # unsigned number + +# If set, will indent trailing single line ('//') comments relative +# to the code instead of trying to keep the same absolute column. +indent_relative_single_line_comments = false # false/true + +# Spaces to indent 'case' from 'switch' +# Usually 0 or indent_columns. +indent_switch_case = 0 # unsigned number + +# Whether to indent preproccesor statements inside of switch statements. +indent_switch_pp = true # false/true + +# Spaces to shift the 'case' line, without affecting any other lines +# Usually 0. +indent_case_shift = 0 # unsigned number + +# Spaces to indent '{' from 'case'. +# By default, the brace will appear under the 'c' in case. +# Usually set to 0 or indent_columns. +# negative value are OK. +indent_case_brace = 0 # number + +# Whether to indent comments found in first column. +indent_col1_comment = true # false/true + +# How to indent goto labels +# >0: absolute column where 1 is the leftmost column +# <=0: subtract from brace indent +# Default=1 +indent_label = 1 # number + +# Same as indent_label, but for access specifiers that are followed by a colon. Default=1 +indent_access_spec = 1 # number + +# Indent the code after an access specifier by one level. +# If set, this option forces 'indent_access_spec=0'. +indent_access_spec_body = false # false/true + +# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended). +indent_paren_nl = false # false/true + +# Controls the indent of a close paren after a newline. +# 0: Indent to body level +# 1: Align under the open paren +# 2: Indent to the brace level +indent_paren_close = 0 # unsigned number + +# Controls the indent of the open paren of a function definition, if on it's own line.If True, indents the open paren +indent_paren_after_func_def = false # false/true + +# Controls the indent of the open paren of a function declaration, if on it's own line.If True, indents the open paren +indent_paren_after_func_decl = false # false/true + +# Controls the indent of the open paren of a function call, if on it's own line.If True, indents the open paren +indent_paren_after_func_call = false # false/true + +# Controls the indent of a comma when inside a paren.If True, aligns under the open paren. +indent_comma_paren = false # false/true + +# Controls the indent of a BOOL operator when inside a paren.If True, aligns under the open paren. +indent_bool_paren = false # false/true + +# If 'indent_bool_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones. +indent_first_bool_expr = false # false/true + +# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended). +indent_square_nl = false # false/true + +# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies. +indent_preserve_sql = false # false/true + +# Align continued statements at the '='. Default=True +# If False or the '=' is followed by a newline, the next line is indent one tab. +indent_align_assign = true # false/true + +# Indent OC blocks at brace level instead of usual rules. +indent_oc_block = false # false/true + +# Indent OC blocks in a message relative to the parameter name. +# 0=use indent_oc_block rules, 1+=spaces to indent +indent_oc_block_msg = 0 # unsigned number + +# Minimum indent for subsequent parameters +indent_oc_msg_colon = 0 # unsigned number + +# If True, prioritize aligning with initial colon (and stripping spaces from lines, if necessary). +# Default=True. +indent_oc_msg_prioritize_first_colon = true # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level). +indent_oc_block_msg_xcode_style = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword. +indent_oc_block_msg_from_keyword = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon. +indent_oc_block_msg_from_colon = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is. +indent_oc_block_msg_from_caret = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is. +indent_oc_block_msg_from_brace = false # false/true + +# When identing after virtual brace open and newline add further spaces to reach this min. indent. +indent_min_vbrace_open = 0 # unsigned number + +# True: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop. +indent_vbrace_open_on_tabstop = false # false/true + +# If True, a brace followed by another token (not a newline) will indent all contained lines to match the token.Default=True. +indent_token_after_brace = true # false/true + +# If True, cpp lambda body will be indentedDefault=False. +indent_cpp_lambda_body = false # false/true + +# indent (or not) an using block if no braces are used. Only for C#.Default=True. +indent_using_block = true # false/true + +# indent the continuation of ternary operator. +# 0: (Default) off +# 1: When the `if_false` is a continuation, indent it under `if_false` +# 2: When the `:` is a continuation, indent it under `?` +indent_ternary_operator = 0 # unsigned number + +# If true, ignore indent and align for asm blocks as they have their own indentation. +indent_ignore_asm_block = false # false/true + +# +# Newline adding and removing options +# + +# Whether to collapse empty blocks between '{' and '}'. +nl_collapse_empty_body = true # false/true + +# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'. +nl_assign_leave_one_liners = true # false/true + +# Don't split one-line braced statements inside a class xx { } body. +nl_class_leave_one_liners = false # false/true + +# Don't split one-line enums: 'enum foo { BAR = 15 };' +nl_enum_leave_one_liners = true # false/true + +# Don't split one-line get or set functions. +nl_getset_leave_one_liners = false # false/true + +# Don't split one-line function definitions - 'int foo() { return 0; }'. +nl_func_leave_one_liners = false # false/true + +# Don't split one-line C++11 lambdas - '[]() { return 0; }'. +nl_cpp_lambda_leave_one_liners = false # false/true + +# Don't split one-line if/else statements - 'if(a) b++;'. +nl_if_leave_one_liners = false # false/true + +# Don't split one-line while statements - 'while(a) b++;'. +nl_while_leave_one_liners = false # false/true + +# Don't split one-line OC messages. +nl_oc_msg_leave_one_liner = false # false/true + +# Add or remove newline between Objective-C block signature and '{'. +nl_oc_block_brace = ignore # ignore/add/remove/force + +# Add or remove newlines at the start of the file. +nl_start_of_file = remove # ignore/add/remove/force + +# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'. +nl_start_of_file_min = 0 # unsigned number + +# Add or remove newline at the end of the file. +nl_end_of_file = force # ignore/add/remove/force + +# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force'). +nl_end_of_file_min = 1 # unsigned number + +# Add or remove newline between '=' and '{'. +nl_assign_brace = remove # ignore/add/remove/force + +# Add or remove newline between '=' and '[' (D only). +nl_assign_square = ignore # ignore/add/remove/force + +# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'. +nl_after_square_assign = ignore # ignore/add/remove/force + +# The number of blank lines after a block of variable definitions at the top of a function body +# 0 = No change (default). +nl_func_var_def_blk = 1 # unsigned number + +# The number of newlines before a block of typedefs +# 0 = No change (default) +# is overridden by the option 'nl_after_access_spec'. +nl_typedef_blk_start = 0 # unsigned number + +# The number of newlines after a block of typedefs +# 0 = No change (default). +nl_typedef_blk_end = 0 # unsigned number + +# The maximum consecutive newlines within a block of typedefs +# 0 = No change (default). +nl_typedef_blk_in = 0 # unsigned number + +# The number of newlines before a block of variable definitions not at the top of a function body +# 0 = No change (default) +# is overridden by the option 'nl_after_access_spec'. +nl_var_def_blk_start = 0 # unsigned number + +# The number of newlines after a block of variable definitions not at the top of a function body +# 0 = No change (default). +nl_var_def_blk_end = 0 # unsigned number + +# The maximum consecutive newlines within a block of variable definitions +# 0 = No change (default). +nl_var_def_blk_in = 0 # unsigned number + +# Add or remove newline between a function call's ')' and '{', as in: +# list_for_each(item, &list) { }. +nl_fcall_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'enum' and '{'. +nl_enum_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'enum' and 'class'. +nl_enum_class = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum class' and the identifier. +nl_enum_class_identifier = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum class' type and ':'. +nl_enum_identifier_colon = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum class identifier :' and 'type' and/or 'type'. +nl_enum_colon_type = ignore # ignore/add/remove/force + +# Add or remove newline between 'struct and '{'. +nl_struct_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'union' and '{'. +nl_union_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'if' and '{'. +nl_if_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'else'. +nl_brace_else = remove # ignore/add/remove/force + +# Add or remove newline between 'else if' and '{' +# If set to ignore, nl_if_brace is used instead. +nl_elseif_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'else' and '{'. +nl_else_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'else' and 'if'. +nl_else_if = remove # ignore/add/remove/force + +# Add or remove newline before 'if'/'else if' closing parenthesis. +nl_before_if_closing_paren = ignore # ignore/add/remove/force + +# Add or remove newline between '}' and 'finally'. +nl_brace_finally = remove # ignore/add/remove/force + +# Add or remove newline between 'finally' and '{'. +nl_finally_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'try' and '{'. +nl_try_brace = remove # ignore/add/remove/force + +# Add or remove newline between get/set and '{'. +nl_getset_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'for' and '{'. +nl_for_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'catch' and '{'. +nl_catch_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'catch'. +nl_brace_catch = remove # ignore/add/remove/force + +# Add or remove newline between '}' and ']'. +nl_brace_square = ignore # ignore/add/remove/force + +# Add or remove newline between '}' and ')' in a function invocation. +nl_brace_fparen = ignore # ignore/add/remove/force + +# Add or remove newline between 'while' and '{'. +nl_while_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'scope (x)' and '{' (D). +nl_scope_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'unittest' and '{' (D). +nl_unittest_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'version (x)' and '{' (D). +nl_version_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'using' and '{'. +nl_using_brace = remove # ignore/add/remove/force + +# Add or remove newline between two open or close braces. +# Due to general newline/brace handling, REMOVE may not work. +nl_brace_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'do' and '{'. +nl_do_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'while' of 'do' statement. +nl_brace_while = remove # ignore/add/remove/force + +# Add or remove newline between 'switch' and '{'. +nl_switch_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'synchronized' and '{'. +nl_synchronized_brace = ignore # ignore/add/remove/force + +# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc. +# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace. +nl_multi_line_cond = false # false/true + +# Force a newline in a define after the macro name for multi-line defines. +nl_multi_line_define = false # false/true + +# Whether to put a newline before 'case' statement, not after the first 'case'. +nl_before_case = false # false/true + +# Add or remove newline between ')' and 'throw'. +nl_before_throw = ignore # ignore/add/remove/force + +# Whether to put a newline after 'case' statement. +nl_after_case = true # false/true + +# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case. +nl_case_colon_brace = remove # ignore/add/remove/force + +# Newline between namespace and {. +nl_namespace_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'template<>' and whatever follows. +nl_template_class = ignore # ignore/add/remove/force + +# Add or remove newline between 'class' and '{'. +nl_class_brace = ignore # ignore/add/remove/force + +# Add or remove newline before/after each ',' in the base class list, +# (tied to pos_class_comma). +nl_class_init_args = force # ignore/add/remove/force + +# Add or remove newline after each ',' in the constructor member initialization. +# Related to nl_constr_colon, pos_constr_colon and pos_constr_comma. +nl_constr_init_args = ignore # ignore/add/remove/force + +# Add or remove newline before first element, after comma, and after last element in enum. +nl_enum_own_lines = ignore # ignore/add/remove/force + +# Add or remove newline between return type and function name in a function definition. +nl_func_type_name = remove # ignore/add/remove/force + +# Add or remove newline between return type and function name inside a class {} +# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore. +nl_func_type_name_class = ignore # ignore/add/remove/force + +# Add or remove newline between class specification and '::' in 'void A::f() { }' +# Only appears in separate member implementation (does not appear with in-line implmementation). +nl_func_class_scope = ignore # ignore/add/remove/force + +# Add or remove newline between function scope and name +# Controls the newline after '::' in 'void A::f() { }'. +nl_func_scope_name = ignore # ignore/add/remove/force + +# Add or remove newline between return type and function name in a prototype. +nl_func_proto_type_name = remove # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the declaration. +nl_func_paren = remove # ignore/add/remove/force + +# Overrides nl_func_paren for functions with no parameters. +nl_func_paren_empty = ignore # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the definition. +nl_func_def_paren = remove # ignore/add/remove/force + +# Overrides nl_func_def_paren for functions with no parameters. +nl_func_def_paren_empty = ignore # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the call +nl_func_call_paren = ignore # ignore/add/remove/force + +# Overrides nl_func_call_paren for functions with no parameters. +nl_func_call_paren_empty = ignore # ignore/add/remove/force + +# Add or remove newline after '(' in a function declaration. +nl_func_decl_start = remove # ignore/add/remove/force + +# Add or remove newline after '(' in a function definition. +nl_func_def_start = remove # ignore/add/remove/force + +# Overrides nl_func_decl_start when there is only one parameter. +nl_func_decl_start_single = ignore # ignore/add/remove/force + +# Overrides nl_func_def_start when there is only one parameter. +nl_func_def_start_single = ignore # ignore/add/remove/force + +# Whether to add newline after '(' in a function declaration if '(' and ')' are in different lines. +nl_func_decl_start_multi_line = false # false/true + +# Whether to add newline after '(' in a function definition if '(' and ')' are in different lines. +nl_func_def_start_multi_line = false # false/true + +# Add or remove newline after each ',' in a function declaration. +nl_func_decl_args = force # ignore/add/remove/force + +# Add or remove newline after each ',' in a function definition. +nl_func_def_args = force # ignore/add/remove/force + +# Whether to add newline after each ',' in a function declaration if '(' and ')' are in different lines. +nl_func_decl_args_multi_line = false # false/true + +# Whether to add newline after each ',' in a function definition if '(' and ')' are in different lines. +nl_func_def_args_multi_line = false # false/true + +# Add or remove newline before the ')' in a function declaration. +nl_func_decl_end = remove # ignore/add/remove/force + +# Add or remove newline before the ')' in a function definition. +nl_func_def_end = remove # ignore/add/remove/force + +# Overrides nl_func_decl_end when there is only one parameter. +nl_func_decl_end_single = ignore # ignore/add/remove/force + +# Overrides nl_func_def_end when there is only one parameter. +nl_func_def_end_single = ignore # ignore/add/remove/force + +# Whether to add newline before ')' in a function declaration if '(' and ')' are in different lines. +nl_func_decl_end_multi_line = false # false/true + +# Whether to add newline before ')' in a function definition if '(' and ')' are in different lines. +nl_func_def_end_multi_line = false # false/true + +# Add or remove newline between '()' in a function declaration. +nl_func_decl_empty = remove # ignore/add/remove/force + +# Add or remove newline between '()' in a function definition. +nl_func_def_empty = remove # ignore/add/remove/force + +# Add or remove newline between '()' in a function call. +nl_func_call_empty = ignore # ignore/add/remove/force + +# Whether to add newline after '(' in a function call if '(' and ')' are in different lines. +nl_func_call_start_multi_line = false # false/true + +# Whether to add newline after each ',' in a function call if '(' and ')' are in different lines. +nl_func_call_args_multi_line = false # false/true + +# Whether to add newline before ')' in a function call if '(' and ')' are in different lines. +nl_func_call_end_multi_line = false # false/true + +# Whether to put each OC message parameter on a separate line +# See nl_oc_msg_leave_one_liner. +nl_oc_msg_args = false # false/true + +# Add or remove newline between function signature and '{'. +nl_fdef_brace = force # ignore/add/remove/force + +# Add or remove newline between C++11 lambda signature and '{'. +nl_cpp_ldef_brace = ignore # ignore/add/remove/force + +# Add or remove a newline between the return keyword and return expression. +nl_return_expr = remove # ignore/add/remove/force + +# Whether to put a newline after semicolons, except in 'for' statements. +nl_after_semicolon = true # false/true + +# Java: Control the newline between the ')' and '{{' of the double brace initializer. +nl_paren_dbrace_open = ignore # ignore/add/remove/force + +# Whether to put a newline after the type in an unnamed temporary direct-list-initialization. +nl_type_brace_init_lst = ignore # ignore/add/remove/force + +# Whether to put a newline after open brace in an unnamed temporary direct-list-initialization. +nl_type_brace_init_lst_open = ignore # ignore/add/remove/force + +# Whether to put a newline before close brace in an unnamed temporary direct-list-initialization. +nl_type_brace_init_lst_close = ignore # ignore/add/remove/force + +# Whether to put a newline after brace open. +# This also adds a newline before the matching brace close. +nl_after_brace_open = true # false/true + +# If nl_after_brace_open and nl_after_brace_open_cmt are True, a newline is +# placed between the open brace and a trailing single-line comment. +nl_after_brace_open_cmt = false # false/true + +# Whether to put a newline after a virtual brace open with a non-empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open = true # false/true + +# Whether to put a newline after a virtual brace open with an empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open_empty = false # false/true + +# Whether to put a newline after a brace close. +# Does not apply if followed by a necessary ';'. +nl_after_brace_close = false # false/true + +# Whether to put a newline after a virtual brace close. +# Would add a newline before return in: 'if (foo) a++; return;'. +nl_after_vbrace_close = false # false/true + +# Control the newline between the close brace and 'b' in: 'struct { int a; } b;' +# Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close. +nl_brace_struct_var = ignore # ignore/add/remove/force + +# Whether to alter newlines in '#define' macros. +nl_define_macro = false # false/true + +# Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and '#endif'. Does not affect top-level #ifdefs. +nl_squeeze_ifdef = false # false/true + +# Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well. +nl_squeeze_ifdef_top_level = false # false/true + +# Add or remove blank line before 'if'. +nl_before_if = ignore # ignore/add/remove/force + +# Add or remove blank line after 'if' statement. +# Add/Force work only if the next token is not a closing brace. +nl_after_if = force # ignore/add/remove/force + +# Add or remove blank line before 'for'. +nl_before_for = ignore # ignore/add/remove/force + +# Add or remove blank line after 'for' statement. +nl_after_for = force # ignore/add/remove/force + +# Add or remove blank line before 'while'. +nl_before_while = ignore # ignore/add/remove/force + +# Add or remove blank line after 'while' statement. +nl_after_while = force # ignore/add/remove/force + +# Add or remove blank line before 'switch'. +nl_before_switch = ignore # ignore/add/remove/force + +# Add or remove blank line after 'switch' statement. +nl_after_switch = force # ignore/add/remove/force + +# Add or remove blank line before 'synchronized'. +nl_before_synchronized = ignore # ignore/add/remove/force + +# Add or remove blank line after 'synchronized' statement. +nl_after_synchronized = ignore # ignore/add/remove/force + +# Add or remove blank line before 'do'. +nl_before_do = ignore # ignore/add/remove/force + +# Add or remove blank line after 'do/while' statement. +nl_after_do = force # ignore/add/remove/force + +# Whether to double-space commented-entries in struct/union/enum. +nl_ds_struct_enum_cmt = false # false/true + +# force nl before } of a struct/union/enum +# (lower priority than 'eat_blanks_before_close_brace'). +nl_ds_struct_enum_close_brace = false # false/true + +# Add or remove blank line before 'func_class_def'. +nl_before_func_class_def = 0 # unsigned number + +# Add or remove blank line before 'func_class_proto'. +nl_before_func_class_proto = 0 # unsigned number + +# Add or remove a newline before/after a class colon, +# (tied to pos_class_colon). +nl_class_colon = ignore # ignore/add/remove/force + +# Add or remove a newline around a class constructor colon. +# Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma. +nl_constr_colon = ignore # ignore/add/remove/force + +# Change simple unbraced if statements into a one-liner +# 'if(b)\n i++;' => 'if(b) i++;'. +nl_create_if_one_liner = false # false/true + +# Change simple unbraced for statements into a one-liner +# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'. +nl_create_for_one_liner = false # false/true + +# Change simple unbraced while statements into a one-liner +# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'. +nl_create_while_one_liner = false # false/true + +# Change a one-liner if statement into simple unbraced if +# 'if(b) i++;' => 'if(b)\n i++;'. +nl_split_if_one_liner = false # false/true + +# Change a one-liner for statement into simple unbraced for +# 'for (i=0;<5;i++) foo(i);' => 'for (i=0;<5;i++)\n foo(i);'. +nl_split_for_one_liner = false # false/true + +# Change a one-liner while statement into simple unbraced while +# 'while (i<5) foo(i++);' => 'while (i<5)\n foo(i++);'. +nl_split_while_one_liner = false # false/true + +# +# Blank line options +# + +# The maximum consecutive newlines (3 = 2 blank lines). +nl_max = 2 # unsigned number + +# The maximum consecutive newlines in function. +nl_max_blank_in_func = 0 # unsigned number + +# The number of newlines after a function prototype, if followed by another function prototype. +nl_after_func_proto = 0 # unsigned number + +# The number of newlines after a function prototype, if not followed by another function prototype. +nl_after_func_proto_group = 0 # unsigned number + +# The number of newlines after a function class prototype, if followed by another function class prototype. +nl_after_func_class_proto = 0 # unsigned number + +# The number of newlines after a function class prototype, if not followed by another function class prototype. +nl_after_func_class_proto_group = 0 # unsigned number + +# The number of newlines before a multi-line function def body. +nl_before_func_body_def = 0 # unsigned number + +# The number of newlines before a multi-line function prototype body. +nl_before_func_body_proto = 0 # unsigned number + +# The number of newlines after '}' of a multi-line function body. +nl_after_func_body = 2 # unsigned number + +# The number of newlines after '}' of a multi-line function body in a class declaration. +nl_after_func_body_class = 2 # unsigned number + +# The number of newlines after '}' of a single line function body. +nl_after_func_body_one_liner = 2 # unsigned number + +# The minimum number of newlines before a multi-line comment. +# Doesn't apply if after a brace open or another multi-line comment. +nl_before_block_comment = 2 # unsigned number + +# The minimum number of newlines before a single-line C comment. +# Doesn't apply if after a brace open or other single-line C comments. +nl_before_c_comment = 0 # unsigned number + +# The minimum number of newlines before a CPP comment. +# Doesn't apply if after a brace open or other CPP comments. +nl_before_cpp_comment = 0 # unsigned number + +# Whether to force a newline after a multi-line comment. +nl_after_multiline_comment = false # false/true + +# Whether to force a newline after a label's colon. +nl_after_label_colon = false # false/true + +# The number of newlines after '}' or ';' of a struct/enum/union definition. +nl_after_struct = 0 # unsigned number + +# The number of newlines before a class definition. +nl_before_class = 0 # unsigned number + +# The number of newlines after '}' or ';' of a class definition. +nl_after_class = 0 # unsigned number + +# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label. +# Will not change the newline count if after a brace open. +# 0 = No change. +nl_before_access_spec = 0 # unsigned number + +# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label. +# 0 = No change. +# Overrides 'nl_typedef_blk_start' and 'nl_var_def_blk_start'. +nl_after_access_spec = 0 # unsigned number + +# The number of newlines between a function def and the function comment. +# 0 = No change. +nl_comment_func_def = 0 # unsigned number + +# The number of newlines after a try-catch-finally block that isn't followed by a brace close. +# 0 = No change. +nl_after_try_catch_finally = 0 # unsigned number + +# The number of newlines before and after a property, indexer or event decl. +# 0 = No change. +nl_around_cs_property = 0 # unsigned number + +# The number of newlines between the get/set/add/remove handlers in C#. +# 0 = No change. +nl_between_get_set = 0 # unsigned number + +# Add or remove newline between C# property and the '{'. +nl_property_brace = ignore # ignore/add/remove/force + +# Whether to remove blank lines after '{'. +eat_blanks_after_open_brace = true # false/true + +# Whether to remove blank lines before '}'. +eat_blanks_before_close_brace = true # false/true + +# How aggressively to remove extra newlines not in preproc. +# 0: No change +# 1: Remove most newlines not handled by other config +# 2: Remove all newlines and reformat completely by config +nl_remove_extra_newlines = 0 # unsigned number + +# Whether to put a blank line before 'return' statements, unless after an open brace. +nl_before_return = true # false/true + +# Whether to put a blank line after 'return' statements, unless followed by a close brace. +nl_after_return = false # false/true + +# Whether to put a newline after a Java annotation statement. +# Only affects annotations that are after a newline. +nl_after_annotation = ignore # ignore/add/remove/force + +# Controls the newline between two annotations. +nl_between_annotation = ignore # ignore/add/remove/force + +# +# Positioning options +# + +# The position of arithmetic operators in wrapped expressions. +pos_arith = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of assignment in wrapped expressions. +# Do not affect '=' followed by '{'. +pos_assign = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of boolean operators in wrapped expressions. +pos_bool = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of comparison operators in wrapped expressions. +pos_compare = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of conditional (b ? t : f) operators in wrapped expressions. +pos_conditional = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of the comma in wrapped expressions. +pos_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of the comma in enum entries. +pos_enum_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of the comma in the base class list if there are more than one line, +# (tied to nl_class_init_args). +pos_class_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of the comma in the constructor initialization list. +# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon. +pos_constr_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of trailing/leading class colon, between class and base class list +# (tied to nl_class_colon). +pos_class_colon = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# The position of colons between constructor and member initialization, +# (tied to nl_constr_colon). +# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma. +pos_constr_colon = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# +# Line Splitting options +# + +# Try to limit code width to N number of columns +code_width = 80 # unsigned number + +# Whether to fully split long 'for' statements at semi-colons. +ls_for_split_full = false # false/true + +# Whether to fully split long function protos/calls at commas. +ls_func_split_full = false # false/true + +# Whether to split lines as close to code_width as possible and ignore some groupings. +ls_code_width = false # false/true + +# +# Code alignment (not left column spaces/tabs) +# + +# Whether to keep non-indenting tabs. +align_keep_tabs = false # false/true + +# Whether to use tabs for aligning. +align_with_tabs = false # false/true + +# Whether to bump out to the next tab when aligning. +align_on_tabstop = false # false/true + +# Whether to right-align numbers. +align_number_right = false # false/true + +# Whether to keep whitespace not required for alignment. +align_keep_extra_space = false # false/true + +# Align variable definitions in prototypes and functions. +align_func_params = false # false/true + +# The span for aligning parameter definitions in function on parameter name (0=don't align). +align_func_params_span = 0 # unsigned number + +# The threshold for aligning function parameter definitions (0=no limit). +align_func_params_thresh = 0 # unsigned number + +# The gap for aligning function parameter definitions. +align_func_params_gap = 0 # unsigned number + +# Align parameters in single-line functions that have the same name. +# The function names must already be aligned with each other. +align_same_func_call_params = false # false/true + +# The span for aligning variable definitions (0=don't align) +align_var_def_span = 0 # unsigned number + +# How to align the star in variable definitions. +# 0=Part of the type 'void * foo;' +# 1=Part of the variable 'void *foo;' +# 2=Dangling 'void *foo;' +align_var_def_star_style = 1 # unsigned number + +# How to align the '&' in variable definitions. +# 0=Part of the type +# 1=Part of the variable +# 2=Dangling +align_var_def_amp_style = 1 # unsigned number + +# The threshold for aligning variable definitions (0=no limit) +align_var_def_thresh = 0 # unsigned number + +# The gap for aligning variable definitions. +align_var_def_gap = 0 # unsigned number + +# Whether to align the colon in struct bit fields. +align_var_def_colon = false # false/true + +# align variable defs gap for bit colons. +align_var_def_colon_gap = 0 # unsigned number + +# Whether to align any attribute after the variable name. +align_var_def_attribute = false # false/true + +# Whether to align inline struct/enum/union variable definitions. +align_var_def_inline = true # false/true + +# The span for aligning on '=' in assignments (0=don't align) +align_assign_span = 0 # unsigned number + +# The threshold for aligning on '=' in assignments (0=no limit) +align_assign_thresh = 0 # unsigned number + +# The span for aligning on '=' in enums (0=don't align) +align_enum_equ_span = 1 # unsigned number + +# The threshold for aligning on '=' in enums (0=no limit) +align_enum_equ_thresh = 0 # unsigned number + +# The span for aligning class (0=don't align) +align_var_class_span = 0 # unsigned number + +# The threshold for aligning class member definitions (0=no limit). +align_var_class_thresh = 0 # unsigned number + +# The gap for aligning class member definitions. +align_var_class_gap = 0 # unsigned number + +# The span for aligning struct/union (0=don't align) +align_var_struct_span = 3 # unsigned number + +# The threshold for aligning struct/union member definitions (0=no limit) +align_var_struct_thresh = 0 # unsigned number + +# The gap for aligning struct/union member definitions. +align_var_struct_gap = 0 # unsigned number + +# The span for aligning struct initializer values (0=don't align) +align_struct_init_span = 3 # unsigned number + +# The minimum space between the type and the synonym of a typedef. +align_typedef_gap = 0 # unsigned number + +# The span for aligning single-line typedefs (0=don't align). +align_typedef_span = 0 # unsigned number + +# How to align typedef'd functions with other typedefs +# 0: Don't mix them at all +# 1: align the open paren with the types +# 2: align the function type name with the other type names +align_typedef_func = 0 # unsigned number + +# Controls the positioning of the '*' in typedefs. Just try it. +# 0: Align on typedef type, ignore '*' +# 1: The '*' is part of type name: typedef int *pint; +# 2: The '*' is part of the type, but dangling: typedef int *pint; +align_typedef_star_style = 0 # unsigned number + +# Controls the positioning of the '&' in typedefs. Just try it. +# 0: Align on typedef type, ignore '&' +# 1: The '&' is part of type name: typedef int &pint; +# 2: The '&' is part of the type, but dangling: typedef int &pint; +align_typedef_amp_style = 0 # unsigned number + +# The span for aligning comments that end lines (0=don't align) +align_right_cmt_span = 3 # unsigned number + +# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment. +align_right_cmt_mix = false # false/true + +# If a trailing comment is more than this number of columns away from the text it follows, +# it will qualify for being aligned. This has to be > 0 to do anything. +align_right_cmt_gap = 0 # unsigned number + +# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore) +align_right_cmt_at_col = 0 # unsigned number + +# The span for aligning function prototypes (0=don't align). +align_func_proto_span = 0 # unsigned number + +# Minimum gap between the return type and the function name. +align_func_proto_gap = 0 # unsigned number + +# Align function protos on the 'operator' keyword instead of what follows. +align_on_operator = false # false/true + +# Whether to mix aligning prototype and variable declarations. +# If True, align_var_def_XXX options are used instead of align_func_proto_XXX options. +align_mix_var_proto = false # false/true + +# Align single-line functions with function prototypes, uses align_func_proto_span. +align_single_line_func = false # false/true + +# Aligning the open brace of single-line functions. +# Requires align_single_line_func=True, uses align_func_proto_span. +align_single_line_brace = false # false/true + +# Gap for align_single_line_brace. +align_single_line_brace_gap = 0 # unsigned number + +# The span for aligning ObjC msg spec (0=don't align) +align_oc_msg_spec_span = 0 # unsigned number + +# Whether to align macros wrapped with a backslash and a newline. +# This will not work right if the macro contains a multi-line comment. +align_nl_cont = true # false/true + +# # Align macro functions and variables together. +align_pp_define_together = false # false/true + +# The minimum space between label and value of a preprocessor define. +align_pp_define_gap = 0 # unsigned number + +# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks) +align_pp_define_span = 0 # unsigned number + +# Align lines that start with '<<' with previous '<<'. Default=True. +align_left_shift = false # false/true + +# Align text after asm volatile () colons. +align_asm_colon = false # false/true + +# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align) +align_oc_msg_colon_span = 0 # unsigned number + +# If True, always align with the first parameter, even if it is too short. +align_oc_msg_colon_first = false # false/true + +# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'. +align_oc_decl_colon = false # false/true + +# +# Comment modifications +# + +# Try to wrap comments at cmt_width columns +cmt_width = 80 # unsigned number + +# Set the comment reflow mode (Default=0) +# 0: no reflowing (apart from the line wrapping due to cmt_width) +# 1: no touching at all +# 2: full reflow +cmt_reflow_mode = 0 # unsigned number + +# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting. +cmt_convert_tab_to_spaces = false # false/true + +# If False, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars. +# Default=True. +cmt_indent_multi = true # false/true + +# Whether to group c-comments that look like they are in a block. +cmt_c_group = false # false/true + +# Whether to put an empty '/*' on the first line of the combined c-comment. +cmt_c_nl_start = false # false/true + +# Whether to put a newline before the closing '*/' of the combined c-comment. +cmt_c_nl_end = true # false/true + +# Whether to group cpp-comments that look like they are in a block. +cmt_cpp_group = false # false/true + +# Whether to put an empty '/*' on the first line of the combined cpp-comment. +cmt_cpp_nl_start = false # false/true + +# Whether to put a newline before the closing '*/' of the combined cpp-comment. +cmt_cpp_nl_end = true # false/true + +# Whether to change cpp-comments into c-comments. +cmt_cpp_to_c = true # false/true + +# Whether to put a star on subsequent comment lines. +cmt_star_cont = true # false/true + +# The number of spaces to insert at the start of subsequent comment lines. +cmt_sp_before_star_cont = 0 # unsigned number + +# The number of spaces to insert after the star on subsequent comment lines. +cmt_sp_after_star_cont = 0 # number + +# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of +# the comment are the same length. Default=True. +cmt_multi_check_last = false # false/true + +# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of +# the comment are the same length AND if the length is bigger as the first_len minimum. Default=4 +cmt_multi_first_len_minimum = 4 # unsigned number + +# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment. +# Will substitute $(filename) with the current file's name. +cmt_insert_file_header = "" # string + +# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment. +# Will substitute $(filename) with the current file's name. +cmt_insert_file_footer = "" # string + +# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment. +# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff. +# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }. +cmt_insert_func_header = "" # string + +# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment. +# Will substitute $(class) with the class name. +cmt_insert_class_header = "" # string + +# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment. +# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff. +cmt_insert_oc_msg_header = "" # string + +# If a preprocessor is encountered when stepping backwards from a function name, then +# this option decides whether the comment should be inserted. +# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header. +cmt_insert_before_preproc = false # false/true + +# If a function is declared inline to a class definition, then +# this option decides whether the comment should be inserted. +# Affects cmt_insert_func_header. +cmt_insert_before_inlines = true # false/true + +# If the function is a constructor/destructor, then +# this option decides whether the comment should be inserted. +# Affects cmt_insert_func_header. +cmt_insert_before_ctor_dtor = false # false/true + +# +# Code modifying options (non-whitespace) +# + +# Add or remove braces on single-line 'do' statement. +mod_full_brace_do = ignore # ignore/add/remove/force + +# Add or remove braces on single-line 'for' statement. +mod_full_brace_for = remove # ignore/add/remove/force + +# Add or remove braces on single-line function definitions. (Pawn). +mod_full_brace_function = ignore # ignore/add/remove/force + +# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'. +mod_full_brace_if = remove # ignore/add/remove/force + +# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if. +# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed. +mod_full_brace_if_chain = true # false/true + +# Make all if/elseif/else statements with at least one 'else' or 'else if' fully braced. +# If mod_full_brace_if_chain is used together with this option, all if-else chains will get braces, +# and simple 'if' statements will lose them (if possible). +mod_full_brace_if_chain_only = false # false/true + +# Don't remove braces around statements that span N newlines +mod_full_brace_nl = 0 # unsigned number + +# Blocks removal of braces if the parenthesis of if/for/while/.. span multiple lines. +mod_full_brace_nl_block_rem_mlcond = false # false/true + +# Add or remove braces on single-line 'while' statement. +mod_full_brace_while = remove # ignore/add/remove/force + +# Add or remove braces on single-line 'using ()' statement. +mod_full_brace_using = ignore # ignore/add/remove/force + +# Add or remove unnecessary paren on 'return' statement. +mod_paren_on_return = ignore # ignore/add/remove/force + +# Whether to change optional semicolons to real semicolons. +mod_pawn_semicolon = false # false/true + +# Add parens on 'while' and 'if' statement around bools. +mod_full_paren_if_bool = false # false/true + +# Whether to remove superfluous semicolons. +mod_remove_extra_semicolon = true # false/true + +# If a function body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_function_closebrace_comment = 0 # unsigned number + +# If a namespace body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_namespace_closebrace_comment = 0 # unsigned number + +# If a class body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_class_closebrace_comment = 0 # unsigned number + +# If a switch body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_switch_closebrace_comment = 0 # unsigned number + +# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after +# the #endif, a comment will be added. +mod_add_long_ifdef_endif_comment = 0 # unsigned number + +# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after +# the #else, a comment will be added. +mod_add_long_ifdef_else_comment = 0 # unsigned number + +# If True, will sort consecutive single-line 'import' statements [Java, D]. +mod_sort_import = false # false/true + +# If True, will sort consecutive single-line 'using' statements [C#]. +mod_sort_using = false # false/true + +# If True, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C] +# This is generally a bad idea, as it may break your code. +mod_sort_include = false # false/true + +# If True, it will move a 'break' that appears after a fully braced 'case' before the close brace. +mod_move_case_break = false # false/true + +# Will add or remove the braces around a fully braced case statement. +# Will only remove the braces if there are no variable declarations in the block. +mod_case_brace = ignore # ignore/add/remove/force + +# If True, it will remove a void 'return;' that appears as the last statement in a function. +mod_remove_empty_return = false # false/true + +# If True, it will organize the properties (Obj-C). +mod_sort_oc_properties = false # false/true + +# Determines weight of class property modifier (Obj-C). +mod_sort_oc_property_class_weight = 0 # number + +# Determines weight of atomic, nonatomic (Obj-C). +mod_sort_oc_property_thread_safe_weight = 0 # number + +# Determines weight of readwrite (Obj-C). +mod_sort_oc_property_readwrite_weight = 0 # number + +# Determines weight of reference type (retain, copy, assign, weak, strong) (Obj-C). +mod_sort_oc_property_reference_weight = 0 # number + +# Determines weight of getter type (getter=) (Obj-C). +mod_sort_oc_property_getter_weight = 0 # number + +# Determines weight of setter type (setter=) (Obj-C). +mod_sort_oc_property_setter_weight = 0 # number + +# Determines weight of nullability type (nullable, nonnull, null_unspecified, null_resettable) (Obj-C). +mod_sort_oc_property_nullability_weight = 0 # number + +# +# Preprocessor options +# + +# Control indent of preprocessors inside #if blocks at brace level 0 (file-level). +pp_indent = ignore # ignore/add/remove/force + +# Whether to indent #if/#else/#endif at the brace level (True) or from column 1 (False). +pp_indent_at_level = false # false/true + +# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level). +# If pp_indent_at_level=False, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level). +# Default=1. +pp_indent_count = 1 # unsigned number + +# Add or remove space after # based on pp_level of #if blocks. +pp_space = remove # ignore/add/remove/force + +# Sets the number of spaces added with pp_space. +pp_space_count = 0 # unsigned number + +# The indent for #region and #endregion in C# and '#pragma region' in C/C++. +pp_indent_region = 0 # number + +# Whether to indent the code between #region and #endregion. +pp_region_indent_code = false # false/true + +# If pp_indent_at_level=True, sets the indent for #if, #else and #endif when not at file-level. +# 0: indent preprocessors using output_tab_size. +# >0: column at which all preprocessors will be indented. +pp_indent_if = 0 # number + +# Control whether to indent the code between #if, #else and #endif. +pp_if_indent_code = false # false/true + +# Whether to indent '#define' at the brace level (True) or from column 1 (false). +pp_define_at_level = false # false/true + +# Whether to ignore the '#define' body while formatting. +pp_ignore_define_body = false # false/true + +# Whether to indent case statements between #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the case statements directly inside of. +pp_indent_case = true # false/true + +# Whether to indent whole function definitions between #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the function definition is directly inside of. +pp_indent_func_def = true # false/true + +# Whether to indent extern C blocks between #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the extern block is directly inside of. +pp_indent_extern = true # false/true + +# Whether to indent braces directly inside #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the braces are directly inside of. +pp_indent_brace = true # false/true + +# +# Sort includes options +# + +# The regex for include category with priority 0. +include_category_0 = "" # string + +# The regex for include category with priority 1. +include_category_1 = "" # string + +# The regex for include category with priority 2. +include_category_2 = "" # string + +# +# Use or Do not Use options +# + +# True: indent_func_call_param will be used (default) +# False: indent_func_call_param will NOT be used. +use_indent_func_call_param = true # false/true + +# The value of the indentation for a continuation line is calculate differently if the line is: +# a declaration :your case with QString fileName ... +# an assignment :your case with pSettings = new QSettings( ... +# At the second case the option value might be used twice: +# at the assignment +# at the function call (if present) +# To prevent the double use of the option value, use this option with the value 'True'. +# True: indent_continue will be used only once +# False: indent_continue will be used every time (default). +use_indent_continue_only_once = false # false/true + +# SIGNAL/SLOT Qt macros have special formatting options. See options_for_QT.cpp for details. +# Default=True. +use_options_overriding_for_qt_macros = true # false/true + +# +# Warn levels - 1: error, 2: warning (default), 3: note +# + +# Warning is given if doing tab-to-\t replacement and we have found one in a C# verbatim string literal. +warn_level_tabs_found_in_verbatim_string_literals = 2 # unsigned number + +# Meaning of the settings: +# Ignore - do not do any changes +# Add - makes sure there is 1 or more space/brace/newline/etc +# Force - makes sure there is exactly 1 space/brace/newline/etc, +# behaves like Add in some contexts +# Remove - removes space/brace/newline/etc +# +# +# - Token(s) can be treated as specific type(s) with the 'set' option: +# `set tokenType tokenString [tokenString...]` +# +# Example: +# `set BOOL __AND__ __OR__` +# +# tokenTypes are defined in src/token_enum.h, use them without the +# 'CT_' prefix: 'CT_BOOL' -> 'BOOL' +# +# +# - Token(s) can be treated as type(s) with the 'type' option. +# `type tokenString [tokenString...]` +# +# Example: +# `type int c_uint_8 Rectangle` +# +# This can also be achieved with `set TYPE int c_uint_8 Rectangle` +# +# +# To embed whitespace in tokenStrings use the '\' escape character, or quote +# the tokenStrings. These quotes are supported: "'` +# +# +# - Support for the auto detection of languages through the file ending can be +# added using the 'file_ext' command. +# `file_ext langType langString [langString..]` +# +# Example: +# `file_ext CPP .ch .cxx .cpp.in` +# +# langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use +# them without the 'LANG_' prefix: 'LANG_CPP' -> 'CPP' +# +# +# - Custom macro-based indentation can be set up using 'macro-open', +# 'macro-else' and 'macro-close'. +# `(macro-open | macro-else | macro-close) tokenString` +# +# Example: +# `macro-open BEGIN_TEMPLATE_MESSAGE_MAP` +# `macro-open BEGIN_MESSAGE_MAP` +# `macro-close END_MESSAGE_MAP` +# +## option(s) with 'not default' value: 144 +# diff --git a/tools/mknod/mknod.sh b/tools/mknod/mknod.sh new file mode 100755 index 0000000..2938c68 --- /dev/null +++ b/tools/mknod/mknod.sh @@ -0,0 +1,36 @@ +#!/usr/bin/env sh + +# +# Copyright (c) 2020 Arm Limited. All rights reserved. +# +# SPDX-License-Identifier: Apache-2.0 +# +# Licensed under the Apache License, Version 2.0 (the License); you may +# not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an AS IS BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# Remove existing device nodes +rm -rf /dev/ethosu* + +# Create new device nodes +i=0 +for dev in `find /sys/devices/virtual/ethosu -name dev` +do + major=`cat $dev | cut -d ':' -f 1` + minor=`cat $dev | cut -d ':' -f 2` + + cmd="mknod /dev/ethosu$i c $major $minor" + echo $cmd + $cmd + + i=$(( $i+1 )) +done -- cgit v1.2.1