/* * Copyright (c) 2009-2021 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ __STACK_SIZE = 0x00008000; __HEAP_SIZE = 0x00008000; MEMORY { ITCM (rx) : ORIGIN = 0x10000000, LENGTH = 0x00080000 SRAM (rw) : ORIGIN = 0x11000000, LENGTH = 0x01000000 DTCM (rw) : ORIGIN = 0x30000000, LENGTH = 0x00080000 DDR (rwx) : ORIGIN = 0x70000000, LENGTH = 0x60000000 } PHDRS { rom_exec PT_LOAD; rom_dram PT_LOAD; null PT_NULL; } /* Linker script to place sections and symbol values. Should be used together * with other linker script that defines memory regions ITCM and RAM. * It references following symbols, which must be defined in code: * Reset_Handler : Entry of reset handler * * It defines following symbols, which code can use without definition: * __exidx_start * __exidx_end * __copy_table_start__ * __copy_table_end__ * __zero_table_start__ * __zero_table_end__ * __etext * __data_start__ * __preinit_array_start * __preinit_array_end * __init_array_start * __init_array_end * __fini_array_start * __fini_array_end * __data_end__ * __bss_start__ * __bss_end__ * __end__ * end * __HeapLimit * __StackLimit * __StackTop * __stack */ ENTRY(Reset_Handler) SECTIONS { .text : { KEEP(*(.vectors)) *(.text*) KEEP(*(.init)) KEEP(*(.fini)) /* .ctors */ *crtbegin.o(.ctors) *crtbegin?.o(.ctors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) *(SORT(.ctors.*)) *(.ctors) /* .dtors */ *crtbegin.o(.dtors) *crtbegin?.o(.dtors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) *(.rodata*) KEEP(*(.eh_frame*)) } > ITCM :rom_exec /* * SG veneers: * All SG veneers are placed in the special output section .gnu.sgstubs. Its start address * must be set, either with the command line option '--section-start' or in a linker script, * to indicate where to place these veneers in memory. */ /* .gnu.sgstubs : { . = ALIGN(32); } > ITCM :rom_exec */ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > ITCM :rom_exec .ARM.exidx : { __exidx_start = .; *(.ARM.exidx* .gnu.linkonce.armexidx.*) __exidx_end = .; } > ITCM :rom_exec .copy.table : { . = ALIGN(4); __copy_table_start__ = .; LONG (__etext) LONG (__data_start__) LONG (__data_end__ - __data_start__) LONG (__eddr_data) LONG (__sram_data_start__) LONG (__sram_data_end__ - __sram_data_start__ ) __copy_table_end__ = .; } > ITCM :rom_exec .zero.table : { . = ALIGN(4); __zero_table_start__ = .; LONG (__bss_start__) LONG (__bss_end__ - __bss_start__) __zero_table_end__ = .; /** * Location counter can end up 2byte aligned with narrow Thumb code but * __etext is assumed by startup code to be the LMA of a section in DTCM * which must be 4byte aligned */ __etext = ALIGN (4); } > ITCM :rom_exec .data : AT(__etext) { __data_start__ = .; *(vtable) *(.data) *(.data.*) . = ALIGN(4); /* preinit data */ PROVIDE_HIDDEN (__preinit_array_start = .); KEEP(*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); /* init data */ PROVIDE_HIDDEN (__init_array_start = .); KEEP(*(SORT(.init_array.*))) KEEP(*(.init_array)) PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); /* finit data */ PROVIDE_HIDDEN (__fini_array_start = .); KEEP(*(SORT(.fini_array.*))) KEEP(*(.fini_array)) PROVIDE_HIDDEN (__fini_array_end = .); KEEP(*(.jcr*)) . = ALIGN(4); /* All data end */ __data_end__ = .; } > DTCM :rom_exec .sram.bss : { . = ALIGN(16); #ifdef ETHOSU_FAST_MEMORY_SIZE *(.bss.ethosu_scratch); #else *(.bss.tensor_arena) #endif *.(output_data_sec) } > SRAM :null .ddr : { #ifdef ETHOSU_FAST_MEMORY_SIZE . = ALIGN(16); *(.bss.tensor_arena) #endif . = ALIGN(4); *(input_data_sec) . = ALIGN(16); *(network_model_sec) *(expected_output_data_sec) } > DDR :rom_dram __eddr_data = ALIGN (16) ; .sram.data : { __sram_data_start__ = .; *(.sram.data) __sram_data_end__ = .; } > SRAM AT >DDR :rom_dram .bss : { . = ALIGN(4); __bss_start__ = .; *(.bss) *(.bss.*) *(COMMON) . = ALIGN(4); __bss_end__ = .; } > DTCM :null .heap (COPY) : { . = ALIGN(8); __end__ = .; PROVIDE(end = .); . = . + __HEAP_SIZE; . = ALIGN(8); __HeapLimit = .; } > DTCM :null .stack (ORIGIN(DTCM) + LENGTH(DTCM) - __STACK_SIZE) (COPY) : { . = ALIGN(8); __StackLimit = .; . = . + __STACK_SIZE; . = ALIGN(8); __StackTop = .; } > DTCM :null PROVIDE(__stack = __StackTop); /* Check if data + heap + stack exceeds DTCM limit */ ASSERT(__StackLimit >= __HeapLimit, "region DTCM overflowed with stack") }