From 31ae9f09bb3535975595e999fbc7baca889e46e8 Mon Sep 17 00:00:00 2001
From: alexander <alexander.efremov@arm.com>
Date: Thu, 10 Feb 2022 16:15:54 +0000
Subject: MLECO-2682: CMake and source refactoring.

MLECO-2930: logging macros were extracted from hal.h and used separately around the code.

MLECO-2931: arm_math lib introduced, cmsis-dsp removed from top level linkage.

MLECO-2915: platform related post-build steps.

Change-Id: Id718884e22f262a5c070ded3f3f5d4b048820147
Signed-off-by: alexander <alexander.efremov@arm.com>
---
 .../platforms/native/build_configuration.cmake     | 113 +++++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 scripts/cmake/platforms/native/build_configuration.cmake

(limited to 'scripts/cmake/platforms/native/build_configuration.cmake')

diff --git a/scripts/cmake/platforms/native/build_configuration.cmake b/scripts/cmake/platforms/native/build_configuration.cmake
new file mode 100644
index 0000000..c87ac89
--- /dev/null
+++ b/scripts/cmake/platforms/native/build_configuration.cmake
@@ -0,0 +1,113 @@
+#----------------------------------------------------------------------------
+#  Copyright (c) 2022 Arm Limited. All rights reserved.
+#  SPDX-License-Identifier: Apache-2.0
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#----------------------------------------------------------------------------
+
+set(TEST_TPIP ${DOWNLOAD_DEP_DIR}/test)
+
+file(MAKE_DIRECTORY ${TEST_TPIP})
+set(TEST_TPIP_INCLUDE ${TEST_TPIP}/include)
+file(MAKE_DIRECTORY ${TEST_TPIP_INCLUDE})
+
+ExternalProject_Add(catch2-headers
+        URL https://github.com/catchorg/Catch2/releases/download/v2.11.1/catch.hpp
+        DOWNLOAD_NO_EXTRACT 1
+        CONFIGURE_COMMAND ""
+        BUILD_COMMAND bash -c "cp -R <DOWNLOAD_DIR>/catch.hpp ${TEST_TPIP_INCLUDE}"
+        INSTALL_COMMAND "")
+
+function(set_platform_global_defaults)
+    message(STATUS "Platform: Native (Linux based x86_64/aarch64 system)")
+    if (NOT DEFINED CMAKE_TOOLCHAIN_FILE)
+        set(CMAKE_TOOLCHAIN_FILE ${CMAKE_TOOLCHAIN_DIR}/native-gcc.cmake
+                CACHE FILEPATH "Toolchain file")
+    endif()
+
+endfunction()
+
+function(platform_custom_post_build)
+    set(oneValueArgs TARGET_NAME)
+    cmake_parse_arguments(PARSED "" "${oneValueArgs}" "" ${ARGN} )
+
+
+    # If native build tests
+    set(TEST_SRC_USE_CASE "")
+    foreach(USE_CASES_TESTS_SEARCH_DIR ${USE_CASES_TESTS_SEARCH_DIR_LIST})
+
+        if (EXISTS ${USE_CASES_TESTS_SEARCH_DIR}/${use_case})
+            message(STATUS "Found tests for use-case ${use_case} at ${USE_CASES_TESTS_SEARCH_DIR}/${use_case}.")
+            set(TEST_SRC_USE_CASE ${USE_CASES_TESTS_SEARCH_DIR})
+            break()
+        endif ()
+    endforeach()
+
+    # Add tests only if they exists for the usecase
+    if (NOT ${TEST_SRC_USE_CASE} STREQUAL "")
+
+        set(TEST_RESOURCES_INCLUDE
+                "${TEST_SRCS}/utils/"
+                "${TEST_SRC_USE_CASE}/${use_case}/include/"
+                )
+
+        # Define Test sources and new target to run unit tests
+        file(GLOB_RECURSE TEST_SOURCES
+                "${TEST_SRCS}/common/*.cpp"
+                "${TEST_SRCS}/common/*.cc"
+                "${TEST_SRCS}/utils/*.cc"
+                "${TEST_SRCS}/utils/*.cpp"
+                "${TEST_SRC_USE_CASE}/${use_case}/*.cpp"
+                "${TEST_SRC_USE_CASE}/${use_case}/*.cc"
+                "${TEST_SRC_USE_CASE}/${use_case}/*.c"
+                "${TEST_SRC_USE_CASE}/${use_case}/**/*.cpp"
+                "${TEST_SRC_USE_CASE}/${use_case}/**/*.cc"
+                "${TEST_SRC_USE_CASE}/${use_case}/**/*.c"
+                )
+
+        set(TEST_SRC_GEN_DIR ${CMAKE_BINARY_DIR}/generated/${use_case}/tests/src)
+        set(TEST_INC_GEN_DIR ${CMAKE_BINARY_DIR}/generated/${use_case}/tests/include)
+        file(MAKE_DIRECTORY ${TEST_SRC_GEN_DIR} ${TEST_INC_GEN_DIR})
+
+        set(${use_case}_DEFAULT_TEST_DATA_DIR ${DEFAULT_TEST_DATA_DIR} CACHE PATH "")
+        # Generate test data files to be included in x86 tests
+        generate_test_data_code(
+                INPUT_DIR "${${use_case}_DEFAULT_TEST_DATA_DIR}"
+                DESTINATION_SRC ${TEST_SRC_GEN_DIR}
+                DESTINATION_HDR ${TEST_INC_GEN_DIR}
+                NAMESPACE "test"
+        )
+
+        file(GLOB_RECURSE TEST_SOURCES_GEN
+                "${TEST_SRC_GEN_DIR}/*.cc"
+                "${TEST_SRC_GEN_DIR}/**/*.cc"
+                )
+        message(STATUS "Adding ${TEST_SOURCES_GEN} to test sources")
+        list(APPEND TEST_SOURCES ${TEST_SOURCES_GEN})
+        list(APPEND TEST_RESOURCES_INCLUDE ${TEST_INC_GEN_DIR})
+
+        set(TEST_TARGET_NAME "${CMAKE_PROJECT_NAME}-${use_case}-tests")
+        add_executable(${TEST_TARGET_NAME} ${TEST_SOURCES})
+        target_include_directories(${TEST_TARGET_NAME} PUBLIC
+                ${TEST_TPIP_INCLUDE} ${TEST_RESOURCES_INCLUDE})
+        target_link_libraries(${TEST_TARGET_NAME} PUBLIC ${UC_LIB_NAME})
+        target_compile_definitions(${TEST_TARGET_NAME} PRIVATE
+                "ACTIVATION_BUF_SZ=${${use_case}_ACTIVATION_BUF_SZ}"
+                TESTS)
+
+        add_dependencies(
+                "${TEST_TARGET_NAME}"
+                "catch2-headers"
+        )
+    endif ()
+endfunction()
\ No newline at end of file
-- 
cgit v1.2.1