diff options
Diffstat (limited to 'scripts/cmake/bare-metal-sources.cmake')
| -rw-r--r-- | scripts/cmake/bare-metal-sources.cmake | 206 |
1 files changed, 0 insertions, 206 deletions
diff --git a/scripts/cmake/bare-metal-sources.cmake b/scripts/cmake/bare-metal-sources.cmake deleted file mode 100644 index abca622..0000000 --- a/scripts/cmake/bare-metal-sources.cmake +++ /dev/null @@ -1,206 +0,0 @@ -#---------------------------------------------------------------------------- -# Copyright (c) 2021 Arm Limited. All rights reserved. -# SPDX-License-Identifier: Apache-2.0 -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#---------------------------------------------------------------------------- -set(CMAKE_INSTALL_PREFIX ${CMAKE_SOURCE_DIR}/build_baremetal) -set(PLAT_HAL ${CMAKE_CURRENT_SOURCE_DIR}/source/application/hal/platforms/bare-metal) - -# If target platform not defined raise an error -# TARGET_PLATFORM either should have been defined by the user or set to default value mps3 -if (NOT DEFINED TARGET_PLATFORM) - message(FATAL_ERROR "Invalid target platform, specify TARGET_PLATFORM=mps3") -endif () -message(STATUS "target platform ${TARGET_PLATFORM}") - -set(SOURCE_GEN_DIR ${CMAKE_BINARY_DIR}/generated/bsp) -if (NOT DEFINED MEM_PROFILES_SRC_DIR) - set(MEM_PROFILES_SRC_DIR ${CMAKE_CURRENT_SOURCE_DIR}/scripts/cmake/subsystem-profiles) -endif() - -set(MEM_PROFILE_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/scripts/cmake/templates/peripheral_memmap.h.template) -set(IRQ_PROFILE_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/scripts/cmake/templates/peripheral_irqs.h.template) -set(MEM_REGIONS_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/scripts/cmake/templates/mem_regions.h.template) -set(TA_SETTINGS_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/scripts/cmake/templates/timing_adapter_settings.template) -set(LINKER_SCRIPT_DIR "${PLAT_HAL}/bsp/mem_layout") -set(TENSORFLOW_LITE_MICRO_PLATFORM_LIB_NAME "libtensorflow-microlite.a") -set(TENSORFLOW_LITE_MICRO_FLAG "-DTF_LITE_STATIC_MEMORY") -set(ETHOS_U_NPU_FLAG "-DARM_NPU=1") - -if (ETHOS_U_NPU_ENABLED) - - assert_defined(ETHOS_U_NPU_ID) - assert_defined(ETHOS_U_NPU_MEMORY_MODE) - assert_defined(ETHOS_U_NPU_CONFIG_ID) - - if (ETHOS_U_NPU_MEMORY_MODE STREQUAL Sram_Only) - - if (ETHOS_U_NPU_ID STREQUAL U55) - set(ETHOS_U_NPU_MEMORY_MODE_FLAG "-DETHOS_U_NPU_MEMORY_MODE=ETHOS_U_NPU_MEM_MODE_SRAM_ONLY") - else () - message(FATAL_ERROR "Non compatible Ethos-U NPU memory mode and processor ${ETHOS_U_NPU_MEMORY_MODE} - ${ETHOS_U_NPU_ID}. `sram_only` can be used only for Ethos-U55.") - endif () - - elseif (ETHOS_U_NPU_MEMORY_MODE STREQUAL Shared_Sram) - # Shared Sram can be used for Ethos-U55 and Ethos-U65 - set(ETHOS_U_NPU_MEMORY_MODE_FLAG "-DETHOS_U_NPU_MEMORY_MODE=ETHOS_U_NPU_MEMORY_MODE_SHARED_SRAM") - - elseif (ETHOS_U_NPU_MEMORY_MODE STREQUAL Dedicated_Sram) - # Dedicated Sram is used only for Ethos-U65 - if (ETHOS_U_NPU_ID STREQUAL U65) - set(ETHOS_U_NPU_MEMORY_MODE_FLAG "-DETHOS_U_NPU_MEMORY_MODE=ETHOS_U_NPU_MEMORY_MODE_DEDICATED_SRAM") - else () - message(FATAL_ERROR "Non compatible Ethos-U NPU memory mode and processor ${ETHOS_U_NPU_MEMORY_MODE} - ${ETHOS_U_NPU_ID}. `dedicated_sram` can be used only for Ethos-U65.") - endif () - - else () - message(FATAL_ERROR "Non compatible Ethos-U NPU memory mode ${ETHOS_U_NPU_MEMORY_MODE}") - endif () - - set(OPTIONAL_FLAGS "${OPTIONAL_FLAGS} ${ETHOS_U_NPU_FLAG} ${ETHOS_U_NPU_MEMORY_MODE_FLAG}") -endif () - -# Set specific flags depending on target platform and subsystem -if (TARGET_PLATFORM STREQUAL mps3) - set(MPS3_PLATFORM_FLAG "-DMPS3_PLATFORM=1") - - # If target platform is mps3 and subsystem not defined raise an error, - # TARGET_SUBSYSTEM either should have been defined by the user or set to a default value - if (NOT DEFINED TARGET_SUBSYSTEM) - message(FATAL_ERROR "Target subsystem for mps3 undefined, " - "specify -DTARGET_SUBSYSTEM=<sse-300>") - endif () - - if (TARGET_SUBSYSTEM STREQUAL sse-300) - message(STATUS "target subsystem is ${TARGET_SUBSYSTEM}") - set(BSP_PACKAGE_DIR "${PLAT_HAL}/bsp/bsp-packs/mps3") - set(LINKER_SCRIPT_NAME "${TARGET_PLATFORM}-${TARGET_SUBSYSTEM}") - - # Include the mem profile definitions specific to our target subsystem - include(${MEM_PROFILES_SRC_DIR}/corstone-${TARGET_SUBSYSTEM}.cmake) - set(OPTIONAL_FLAGS "${OPTIONAL_FLAGS} ${MPS3_PLATFORM_FLAG}") - - # For deployment on the MPS3 FPGA platform, we need to produce - # two bin files - one that is loaded into the ITCM, and another - # that is loaded into the DDR region. - set(LINKER_SECTION_TAGS "*.at_itcm" "*.at_ddr") - set(LINKER_OUTPUT_BIN_TAGS "itcm.bin" "ddr.bin") - set(MPS3_FPGA_CONFIG "${CMAKE_CURRENT_SOURCE_DIR}/scripts/${TARGET_PLATFORM}/${TARGET_SUBSYSTEM}/images.txt") - else () - message(FATAL_ERROR "Non compatible target subsystem: ${TARGET_SUBSYSTEM}") - endif () -elseif (TARGET_PLATFORM STREQUAL simple_platform) - set(BSP_PACKAGE_DIR "${PLAT_HAL}/bsp/bsp-packs/${TARGET_PLATFORM}") - set(LINKER_SCRIPT_NAME "${TARGET_PLATFORM}") - include(${MEM_PROFILES_SRC_DIR}/${TARGET_PLATFORM}.cmake) - set(OPTIONAL_FLAGS "${OPTIONAL_FLAGS}") - set(LINKER_SECTION_TAGS "*.at_itcm" "*.at_ddr") - set(LINKER_OUTPUT_BIN_TAGS "itcm.bin" "ddr.bin") -else () - message(FATAL_ERROR "Non compatible target platform ${TARGET_PLATFORM}") -endif () - -# Add link options for the linker script to be used: -add_linker_script(${LINKER_SCRIPT_DIR} ${LINKER_SCRIPT_NAME}) - -if (ETHOS_U_NPU_ENABLED) - if (ETHOS_U_NPU_ID STREQUAL U55) - set(DEFAULT_TA_CONFIG_FILE_PATH "${CMAKE_SCRIPTS_DIR}/timing_adapter/ta_config_u55_high_end.cmake") - else () - set(DEFAULT_TA_CONFIG_FILE_PATH "${CMAKE_SCRIPTS_DIR}/timing_adapter/ta_config_u65_high_end.cmake") - endif () - - # must be included after target subsystem CMake file - assert_defined(TA_CONFIG_FILE) - include(${TA_CONFIG_FILE}) -endif() - -# Generate the memory map header file from the mem profile cmake included in one of -# the previous sections -message(STATUS "Configuring file from ${MEM_PROFILE_TEMPLATE}" - ", ${IRQ_PROFILE_TEMPLATE}" - " and ${MEM_REGIONS_TEMPLATE}") - -configure_file("${MEM_PROFILE_TEMPLATE}" "${SOURCE_GEN_DIR}/peripheral_memmap.h") -configure_file("${IRQ_PROFILE_TEMPLATE}" "${SOURCE_GEN_DIR}/peripheral_irqs.h") -configure_file("${MEM_REGIONS_TEMPLATE}" "${SOURCE_GEN_DIR}/mem_regions.h") -configure_file("${TA_SETTINGS_TEMPLATE}" "${SOURCE_GEN_DIR}/timing_adapter_settings.h") - -message(STATUS "Using BSP package from: ${BSP_PACKAGE_DIR}") - -if (DEFINED VERIFY_TEST_OUTPUT) - message(STATUS "Test output verification flag is: ${VERIFY_TEST_OUTPUT}") - set(OPTIONAL_FLAGS "${OPTIONAL_FLAGS} -DVERIFY_TEST_OUTPUT=${VERIFY_TEST_OUTPUT}") -endif () - -if (DEFINED LOG_LEVEL) - message(STATUS "Setting log level to ${LOG_LEVEL}") - set(OPTIONAL_FLAGS "${OPTIONAL_FLAGS} -DLOG_LEVEL=${LOG_LEVEL}") -endif() - -if (DEFINED ACTIVATION_BUF_SRAM_SZ) - message(STATUS "Maximum SRAM space for activations buffers for this system: ${ACTIVATION_BUF_SRAM_SZ}") - set(OPTIONAL_FLAGS "${OPTIONAL_FLAGS} -DACTIVATION_BUF_SRAM_SZ=${ACTIVATION_BUF_SRAM_SZ}") -endif() - -if (DEFINED ARMCLANG_DEBUG_DWARF_LEVEL) - message(STATUS "setting dwarf conformance level to gdwarf-${ARMCLANG_DEBUG_DWARF_LEVEL}") - set(OPTIONAL_FLAGS "${OPTIONAL_FLAGS} -gdwarf-${ARMCLANG_DEBUG_DWARF_LEVEL}") -endif() - -set(COMPILER_FLAGS "${TENSORFLOW_LITE_MICRO_FLAG} ${PROFILING_OPT} ${OPTIONAL_FLAGS}") -# For some reason, cmake doesn't pass the c++ standard flag, adding it manually -set(CMAKE_CXX_FLAGS "${COMPILER_FLAGS}" CACHE INTERNAL "") -set(CMAKE_C_FLAGS "${COMPILER_FLAGS}" CACHE INTERNAL "") -set(CMAKE_ASM_COMPILE_OBJECT ${CMAKE_CXX_FLAGS}) - -# Tell linker that reset interrupt handler is our entry point -add_link_options(--entry Reset_Handler) - -set(PLAT_BSP_INCLUDES - ${PLAT_HAL}/bsp/cmsis-device/include - ${PLAT_HAL}/bsp/include/ - ${PLAT_HAL}/bsp/bsp-core/include - ${BSP_PACKAGE_DIR}/include -) - -# Include directories: -set(PLAT_INCLUDE_DIRS - ${PLAT_BSP_INCLUDES} - ${PLAT_HAL}/utils/include - ${PLAT_HAL}/images/include - ${PLAT_HAL}/data_presentation/lcd/include - ${PLAT_HAL}/timer/include - ${SOURCE_GEN_DIR} - ) - -# Source files -file(GLOB_RECURSE SRC_PLAT_HAL - - # Higher level HAL sources - software logic implementations - "${PLAT_HAL}/data_*/*.c" - "${PLAT_HAL}/images/*.c" - "${PLAT_HAL}/timer/*.c" - "${PLAT_HAL}/utils/*.c" - - # Low level HAL sources - these enable interaction with - # the actual hardware - "${PLAT_HAL}/bsp/cmsis-device/*.c" - "${PLAT_HAL}/bsp/bsp-core/*.c" - "${BSP_PACKAGE_DIR}/*.c" - ) - -# Special retarget source to direct stdin, stdout and stderr streams to the -# UART block. -set(PLAT_RETARGET_SOURCE "${PLAT_HAL}/bsp/bsp-core/retarget.c") |