diff options
Diffstat (limited to 'ethosu/vela/test/test_register_command_generator.py')
-rw-r--r-- | ethosu/vela/test/test_register_command_generator.py | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/ethosu/vela/test/test_register_command_generator.py b/ethosu/vela/test/test_register_command_generator.py deleted file mode 100644 index 2760c860..00000000 --- a/ethosu/vela/test/test_register_command_generator.py +++ /dev/null @@ -1,204 +0,0 @@ -# Copyright (C) 2020 Arm Limited or its affiliates. All rights reserved. -# -# SPDX-License-Identifier: Apache-2.0 -# -# Licensed under the Apache License, Version 2.0 (the License); you may -# not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an AS IS BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# Description: -# Contains unit tests for register command stream generator -from ethosu.vela.api import NpuAddressRange -from ethosu.vela.api import NpuBlockTraversal -from ethosu.vela.api import NpuConv2DOperation -from ethosu.vela.api import NpuConvDepthWiseOperation -from ethosu.vela.api import NpuDataType -from ethosu.vela.api import NpuElementWiseOp -from ethosu.vela.api import NpuElementWiseOperation -from ethosu.vela.api import NpuFeatureMap -from ethosu.vela.api import NpuKernel -from ethosu.vela.api import NpuLayout -from ethosu.vela.api import NpuPadding -from ethosu.vela.api import NpuShape3D -from ethosu.vela.api import NpuTileBox -from ethosu.vela.architecture_features import Accelerator -from ethosu.vela.architecture_features import create_default_arch -from ethosu.vela.register_command_stream_generator import calc_blockdep -from ethosu.vela.register_command_stream_generator import get_address_ranges -from ethosu.vela.register_command_stream_generator import get_strides -from ethosu.vela.test.extapi.test_extapi_generate_commands import create_feature_map - - -def test_get_fm_strides(): - """Tests calculation of feature map strides""" - fm = NpuFeatureMap() - fm.layout = NpuLayout.NHCWB16 - fm.data_type = NpuDataType.INT16 - fm.shape = NpuShape3D(height=7, width=10, depth=24) - assert get_strides(fm) == NpuShape3D(height=640, width=32, depth=320) - fm.layout = NpuLayout.NHWC - assert get_strides(fm) == NpuShape3D(height=480, width=48, depth=2) - fm.data_type = NpuDataType.UINT8 - assert get_strides(fm) == NpuShape3D(height=240, width=24, depth=1) - - -# ------------------------------------------------------------------- -# ADDRESS TESTS -# ------------------------------------------------------------------- - - -def test_get_address_ranges_one_tile(): - """Tests calculation of feature map address ranges, with 1 tile used""" - fm = NpuFeatureMap() - fm.region = 4 - fm.layout = NpuLayout.NHWC - fm.data_type = NpuDataType.INT16 - fm.shape = NpuShape3D(height=50, width=40, depth=3) - fm.tiles = NpuTileBox(height_0=50, height_1=50, width_0=40, addresses=[8000, 0, 0, 0]) - ranges = get_address_ranges(fm) - assert ranges == [NpuAddressRange(region=4, address=8000, length=12000), None, None, None] - - -def test_get_address_ranges_horizontal_tiles(): - """Tests calculation of feature map address ranges, with 2 horizontal tiles used""" - fm = NpuFeatureMap() - fm.region = 6 - fm.layout = NpuLayout.NHWC - fm.data_type = NpuDataType.INT16 - fm.shape = NpuShape3D(height=50, width=10, depth=20) - fm.tiles = NpuTileBox(height_0=20, height_1=30, width_0=10, addresses=[256, 0, 16000, 0]) - ranges = get_address_ranges(fm) - assert ranges == [ - NpuAddressRange(region=6, address=256, length=8000), - None, - NpuAddressRange(region=6, address=16000, length=12000), - None, - ] - - -def test_get_address_ranges_vertical_tiles(): - """Tests calculation of feature map address ranges, with 2 vertical tiles used""" - fm = NpuFeatureMap() - fm.region = 6 - fm.layout = NpuLayout.NHWC - fm.data_type = NpuDataType.INT8 - # Set strides explicitly - fm.shape = NpuShape3D(height=50, width=10, depth=20) - fm.strides = NpuShape3D(height=100, width=20, depth=1) - fm.tiles = NpuTileBox(height_0=50, height_1=50, width_0=5, addresses=[16, 32000, 0, 0]) - ranges = get_address_ranges(fm) - assert ranges == [ - NpuAddressRange(region=6, address=16, length=5000), - NpuAddressRange(region=6, address=32000, length=5000), - None, - None, - ] - - -def test_get_address_ranges_4_tiles(): - """Tests calculation of feature map address ranges, with 4 tiles used""" - fm = NpuFeatureMap() - fm.region = 6 - fm.layout = NpuLayout.NHCWB16 - fm.data_type = NpuDataType.INT16 - fm.shape = NpuShape3D(height=50, width=10, depth=20) - fm.tiles = NpuTileBox(height_0=30, height_1=10, width_0=3, addresses=[16, 32000, 8000, 16000]) - ranges = get_address_ranges(fm) - assert ranges == [ - NpuAddressRange(region=6, address=16, length=18952), - NpuAddressRange(region=6, address=32000, length=6280), - NpuAddressRange(region=6, address=8000, length=12552), - NpuAddressRange(region=6, address=16000, length=25480), - ] - - -# ------------------------------------------------------------------- -# BLOCKDEP TESTS -# ------------------------------------------------------------------- - - -def test_calc_blockdep0(): - """ - Tests blockdep calculation, op1 that produces op2's IFM2. - op2 takes 1 block to complete, which results in blockdep 0 - """ - op1 = NpuElementWiseOperation(NpuElementWiseOp.CLZ) - op1.ifm = create_feature_map(NpuShape3D(height=1, width=1, depth=1), 1, 0x60, layout=NpuLayout.NHCWB16,) - intermediate_fm = create_feature_map(NpuShape3D(height=1, width=1, depth=1), 1, 0xA0, layout=NpuLayout.NHCWB16,) - op1.ofm = intermediate_fm - op1.block_config = NpuShape3D(height=1, width=1, depth=4) - op2 = NpuElementWiseOperation(NpuElementWiseOp.SUB) - op2.ifm = create_feature_map(NpuShape3D(height=1, width=1, depth=1), 1, 0x39AC0, layout=NpuLayout.NHCWB16,) - op2.ifm2 = intermediate_fm - op2.ofm = create_feature_map(NpuShape3D(height=1, width=1, depth=1), 1, 0xE0, layout=NpuLayout.NHCWB16,) - op2.block_config = NpuShape3D(height=1, width=1, depth=4) - arch = create_default_arch(Accelerator.Ethos_U55_128) - block_dep = calc_blockdep(arch, op1, op2) - assert block_dep == 0 - - -def test_calc_blockdep2(): - """ - Tests blockdep calculation, op1 produces part of the input of op2, - op1 and op2 have different sizes. - op2 takes 3 blocks to complete, op1's last block collides with op2's last block - which results in blockdep 2 - """ - op1 = NpuConv2DOperation() - op1.ifm = create_feature_map(NpuShape3D(height=4, width=48, depth=8), 1, 0x4C80, layout=NpuLayout.NHCWB16,) - op1.ofm = create_feature_map(NpuShape3D(height=4, width=48, depth=16), 1, 0x6480, layout=NpuLayout.NHCWB16,) - op1.kernel = NpuKernel(1, 1) - op1.weights = [NpuAddressRange(region=1, address=0x4AE0, length=208)] - op1.biases = [NpuAddressRange(region=1, address=0x49A0, length=160)] - op1.padding = NpuPadding(top=0, left=0, right=0, bottom=0) - op1.block_traversal = NpuBlockTraversal.PART_KERNEL_FIRST - op1.block_config = NpuShape3D(height=4, width=6, depth=16) - op2 = NpuConvDepthWiseOperation() - op2.ifm = create_feature_map(NpuShape3D(height=3, width=48, depth=16), 1, 0, layout=NpuLayout.NHCWB16,) - # op2 has two tiles, the lower tile is produced by op1 - op2.ifm.tiles = NpuTileBox(height_0=2, height_1=2, width_0=48, addresses=[0x7680, 0, 0x6480, 0]) - op2.ofm = create_feature_map(NpuShape3D(height=1, width=24, depth=16), 1, 0x6480, layout=NpuLayout.NHCWB16,) - op2.kernel = NpuKernel(3, 3, stride_x=2, stride_y=2) - op2.weights = [NpuAddressRange(region=1, address=0x4BB0, length=208)] - op2.biases = [NpuAddressRange(region=1, address=0x4A40, length=160)] - op2.padding = NpuPadding(top=0, left=0, right=0, bottom=0) - op2.block_config = NpuShape3D(height=1, width=8, depth=16) - arch = create_default_arch(Accelerator.Ethos_U55_128) - block_dep = calc_blockdep(arch, op1, op2) - assert block_dep == 2 - - -def test_calc_blockdep3(): - """ - Tests blockdep calculation, op2 consumes part of op1, op1 and op2 have different sizes. - There is no overlap between the last blocks of op1 and the first jobs of op2, - which results in blockdep 3 - """ - op1 = NpuConv2DOperation() - op1.ifm = create_feature_map(NpuShape3D(height=13, width=96, depth=1), 1, 0, layout=NpuLayout.NHWC,) - op1.ofm = create_feature_map(NpuShape3D(height=6, width=48, depth=8), 1, 0x7C80, layout=NpuLayout.NHCWB16,) - op1.kernel = NpuKernel(3, 3, stride_x=2, stride_y=2) - op1.weights = [NpuAddressRange(region=1, address=0x4AE0, length=144)] - op1.biases = [NpuAddressRange(region=1, address=0x49A0, length=80)] - op1.padding = NpuPadding(top=0, left=0, right=1, bottom=0) - op1.block_traversal = NpuBlockTraversal.PART_KERNEL_FIRST - op1.block_config = NpuShape3D(height=6, width=3, depth=8) - op2 = NpuConvDepthWiseOperation() - op2.ifm = create_feature_map(NpuShape3D(height=5, width=48, depth=8), 1, 0x7C80, layout=NpuLayout.NHCWB16,) - op2.ofm = create_feature_map(NpuShape3D(height=4, width=48, depth=8), 1, 0x4C80, layout=NpuLayout.NHCWB16,) - op2.kernel = NpuKernel(3, 3) - op2.weights = [NpuAddressRange(region=1, address=0x4BB0, length=112)] - op2.biases = [NpuAddressRange(region=1, address=0x4A40, length=80)] - op2.padding = NpuPadding(top=0, left=0, right=0, bottom=0) - op2.block_config = NpuShape3D(height=4, width=6, depth=8) - arch = create_default_arch(Accelerator.Ethos_U55_128) - block_dep = calc_blockdep(arch, op1, op2) - assert block_dep == 3 |